07-31-2020, 09:19 AM | #1 |
Not Yet Wild
Join Date: Jul 2020
Posts: 2
|
Losing Power at High RPM
Hello Everyone,
Just finishing up a rebuild and still running rough. Here is what I have done. Crankcase seals New Carb New Starter Generator New Head Gasket and Base Gasket New Belts Compression: 95 Piston and Case seemed fine, almost like new. Here is the problem, starts and runs good at low RPMs, but when I push down on pedal, it engages, then slows, engages, then slows, ect, ect. On all the posts here, the carbs only have one adjustment, but all that I see online clearly have an "L" T bar and then a screw next to it with an "H". I know this is a high speed screw. Do I need to adjust this? |
Tags |
engine runs rough, loss of power |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Losing power | Electric EZGO | |||
G2 losing spark at high rpm | Gas Yamaha | |||
97 CC Losing Power | Electric Club Car | |||
Losing power | Electric EZGO | |||
g2 losing spark at high rpm | Gas Yamaha |