11-01-2018, 09:06 AM | #101 |
Gone Wild
Join Date: Aug 2008
Location: Leander TX
Posts: 166
|
Re: Club Car DS lithium upgrade and 4-Link
Off the top of my head, there’s at least two builds going on using 14 modules if you want to look them up for reference. BBBHC and Jkerle.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-01-2018, 09:11 AM | #102 | |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Club Car DS lithium upgrade and 4-Link
Quote:
However, since the cells are connected in parallel inside the module and you can only "tap" them in the middle of the series connection, a BMS can only manage the equivalent of 2 cells per module for a total of 14 cells in 7 modules. If the company is trying to make sure you have the proper voltage and AH capacity, I would tell them you have 14 cells of 60AH each in series. Also keep in mind, if they ask for the charger set voltage, You are getting the wrong charger setup. If the charger is configured for CAN bus Control, there is no pre-set charging voltage since that is controlled by CAN commands. |
|
11-01-2018, 09:36 AM | #103 |
Not Yet Wild
Join Date: Sep 2018
Location: Miami, FL
Posts: 23
|
Re: Club Car DS lithium upgrade and 4-Link
Thank you
|
11-01-2018, 09:42 AM | #104 |
Gone Wild
Join Date: Oct 2014
Posts: 353
|
Re: Club Car DS lithium upgrade and 4-Link
If you are planing to use 110v (or 120v) power service, and not 220v (240v), then tell them to configure the input power to 110v and 800w maximum. If you don't you will get an error message of "Input Voltage Error"
This does not affect performance or function, only an annoyance. If they ask about CAN prtocol, just tell them to use the standard TC Charger protocol, it will work with the Zeva BMS. Do NOT get "Enable" configured. Get CAN configured. |
11-10-2018, 07:20 PM | #105 |
Just Gone
Join Date: Sep 2015
Location: North Carolina
Posts: 3,549
|
Re: Club Car DS lithium upgrade and 4-Link
Added some battery tray lighting today on a hinge switch so with the seat closed, lights are off. Seat open, lights are on. Also got around to mounting a Kolpin gun holder I've had for around a year.
Lights off LightsOff.jpg Lights on LightsOn.jpg Close up of the SPDT hinge switch HingeSwitch.jpg Gun Holder GunHolder.jpg |
11-10-2018, 07:24 PM | #106 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: Club Car DS lithium upgrade and 4-Link
A little Garnet and Gold would have been nice....
Looks GREAT!! |
11-10-2018, 07:50 PM | #107 |
Gone Wild
Join Date: Oct 2012
Location: Southwestern Pa.
Posts: 6,214
|
Re: Club Car DS lithium upgrade and 4-Link
Kolpin gun holder is nice. But again......with the BLUE!!
Just kidding you. Nothing wrong with supporting the "local" team!! I see you have your monitor mounted in the battery compartment. Is that going to be your permanent spot or is that temporary? |
11-10-2018, 07:52 PM | #108 |
Just Gone
Join Date: Sep 2015
Location: North Carolina
Posts: 3,549
|
Re: Club Car DS lithium upgrade and 4-Link
|
11-10-2018, 07:59 PM | #109 | |
Just Gone
Join Date: Sep 2015
Location: North Carolina
Posts: 3,549
|
Re: Club Car DS lithium upgrade and 4-Link
Quote:
Well, I planned on it being there permanently and using a Drok digital monitor I mounted on the dash. But, one of the fine members here is sending me a mount for my steering column. So that's where I plan on relocating it next week when it gets here. |
|
11-10-2018, 08:02 PM | #110 |
Gone Wild
Join Date: Oct 2012
Location: Southwestern Pa.
Posts: 6,214
|
Re: Club Car DS lithium upgrade and 4-Link
Nice!!!
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Club Car Precedent Lithium Battery Upgrade | Electric Club Car | |||
Lithium Upgrade for my Club Car | Extreme DC! | |||
Lithium Upgrade | Electric EZGO | |||
Lithium Upgrade | Electric EZGO | |||
EZGO TXT Lithium Upgrade | Electric EZGO |