88 Columbia Ignition Module

[kenoman]

Hi All
I received this motor in a box, I have it all back together now but would like to know how the wiring is connected for the coil and ignition module.?
The ignition module has a black and light blue (I believe), how are these connected and where do they go.? Anyone have a diagram.?
Thanks

[Lochlin]

One wire goes to the negative post of the coil and the other just goes to ground but, shoot, by the life me, I can't recall which wire goes where and my cart is 100 miles away so I can't look at it at the moment. I will be able to check this weekend and will post if you can be patient.

Those module are expensive so don't wire that thing until this gets figured out.

[Lochlin]

Ok, I got this for you:

The blue wire on on the module goes to the postive terminal on the coil.

The black wire goes to the negative terminal on the coil.

The blue wire from the accelerator microswitch must also go to the positive terminal on the coil.

Make sure your coil has an internal resistor or you'll burn that new module up quick! If your coil doesn't say "internal resistor" on it somewhere assume it doesn't have one. I made that $120 mistake last year.

[kenoman]

Thanks
Works great