lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 01-01-2021, 03:51 PM   #1
Caseyrollins08
Gone Wild
 
Caseyrollins08's Avatar
Club Car
 
Join Date: Nov 2020
Location: Alvin, TX
Posts: 158
Default Curtis Controller Replacement Question

I currently have a Curtis controller 1204-410 and I found one on Facebook thatís $80 and itís a Curtis 1204-412.
Are these interchangeable? The only difference that Iíve noticed is the 1204-412 has post for a A2 cable. The 1204-410 doesnít have that post. The white cable on my setup goes from the motor to the F/R switch.
If these controllers are interchangeable would I just leave the A2 post alone and keep the A2 white cable from the motor to the F/R switch as is?

At the moment Iím trying to figure out why my solenoids precharge resistor is burning up at itís narrowed down to the controller. I donít want to spend $400 dollars and realize thereís something else that was the problem that caused my controller to fail.
Caseyrollins08 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 01-03-2021, 02:45 PM   #2
NoleFan4Ever
MOD of all BS!
 
NoleFan4Ever's Avatar
Club Car
 
Join Date: Sep 2011
Location: Florida
Posts: 17,404
Default Re: Curtis Controller Replacement Question

Run the FNR cable (white #6) to the A2 post on the controller and then a new #6 from the A2 controller post to the A2 motor post. Many of Series carts were routed this way based on which controller they had.
NoleFan4Ever is offline   Reply With Quote
Old 01-03-2021, 04:24 PM   #3
Caseyrollins08
Gone Wild
 
Caseyrollins08's Avatar
Club Car
 
Join Date: Nov 2020
Location: Alvin, TX
Posts: 158
Default Re: Curtis Controller Replacement Question

Quote:
Originally Posted by NoleFan4Ever View Post
Run the FNR cable (white #6) to the A2 post on the controller and then a new #6 from the A2 controller post to the A2 motor post. Many of Series carts were routed this way based on which controller they had.
Thank you sir.
Caseyrollins08 is offline   Reply With Quote
Reply

Tags
club car, controller, curtis
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Aftermarket replacement for Curtis dcs controller Electric EZGO
Need Replacement EzGo Curtis 1205-117 Controller Electric EZGO
Curtis direct replacement controller? Electric EZGO
1990 Series speed controller replacement for Curtis 1204-009? Electric EZGO
Curtis 1204-001 Speed Controller, Need Replacement Electric EZGO


All times are GMT -5. The time now is 04:24 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.