Curtis direct replacement controller?

Msufn58 · 07-24-2018, 09:49 PM

Are there any direct replacements for a 1264-5407 pds controller
Looking more for a stock application for the time being
2005 shuttle txt pds 48v

cgtech · 07-24-2018, 10:58 PM

If you have a bad one, and are set on "stock replacement", I suggest shipping it off to FSIP www.fsip.biz for repair. Keep in mind this is a repair job, not a rebuild job like a car engine where every gasket and bearing is replaced and rebuilt. That's the difference between a "remanufactured" electronic part and a car engine. They all call it "remanufactured", but they all just repair it (and hopefully thoroughly test it after). I never offer these controllers to my customers, only new parts. There are huge benefits to the new aftermarket controllers. But if you are dead set on stock parts fsip is the only one I would go with.

yurtle · 07-25-2018, 03:30 AM

You may get lucky here. Many folks upgrade and sell off their stock stuff.

http://www.buggiesgonewild.com/golf-carts-parts/

07-24-2018, 09:49 PM	#1
Msufn58 Not Yet Wild Join Date: Jul 2018 Posts: 17	Curtis direct replacement controller? Are there any direct replacements for a 1264-5407 pds controller Looking more for a stock application for the time being 2005 shuttle txt pds 48v
Msufn58 Not Yet Wild Join Date: Jul 2018 Posts: 17

07-24-2018, 10:58 PM	#2
cgtech Over This Interview Is... Join Date: Jun 2012 Location: AZ Posts: 17,449	Re: Curtis direct replacement controller? If you have a bad one, and are set on "stock replacement", I suggest shipping it off to FSIP www.fsip.biz for repair. Keep in mind this is a repair job, not a rebuild job like a car engine where every gasket and bearing is replaced and rebuilt. That's the difference between a "remanufactured" electronic part and a car engine. They all call it "remanufactured", but they all just repair it (and hopefully thoroughly test it after). I never offer these controllers to my customers, only new parts. There are huge benefits to the new aftermarket controllers. But if you are dead set on stock parts fsip is the only one I would go with.

07-25-2018, 03:30 AM	#3
yurtle Gone Mad Join Date: Oct 2009 Location: Buford, GA Posts: 8,988	Re: Curtis direct replacement controller? You may get lucky here. Many folks upgrade and sell off their stock stuff. http://www.buggiesgonewild.com/golf-carts-parts/

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
EZGo RXV 2012 and Curtis 1206AC direct swap to Lifepo4	Electric EZGO
curtis 1204-410 48 volt replacement	Electric Club Car
1990 Series speed controller replacement for Curtis 1204-009?	Electric EZGO
Will a Curtis 1204-412 be a direct drop in in a Yamaha G9?	Electric Yamaha
Curtis 1204-001 Speed Controller, Need Replacement	Electric EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum