Question about Headlight being partially OUT

[Miamidad]

the drivers side headlight Halo rings work perfectly, BUT the Low Beam and High Beams do not. Any clues or idea on how i should troubleshoot? Does anyone know if the halo rings and the actual lights use a different wire harness?

Thank you.

[ATrain]

Originally Posted by Miamidad

the drivers side headlight Halo rings work perfectly, BUT the Low Beam and High Beams do not. Any clues or idea on how i should troubleshoot? Does anyone know if the halo rings and the actual lights use a different wire harness?

Thank you.

First thing is to rule out the obvious just in case. For brights, you pull the lever towards you and hear a click. For the running lights, you just turn the knob at the end of the lever "off" and for headlights you turn it "on".

Then, under the cupholders there are fuses...one could have gone bad. Not sure if they're on separate circuits.

But the main thing is your cart is probably still under warranty. I'd just call the dealer and harass him if they're not working. Those things should last a long time so if you're already having issues they may be faulty.

[Miamidad]

Thanks. it’s not the lever. It only the drivers side that’s out. That’s why I’m
Thinking maybe wire is loose somewhere and the halo’s are on a different circuit.

[anpgator]

Recently repaired a similar issue for a customer and found one of the wires in the left headlight harness was not fully seated in the harness. In another case a few months back, I found a headlight wire had somehow found its way into the front coilover and pinched in two.

[ATrain]

Second that. Just rip the cupholders up and get elbow-deep and check the wires. You can also access some of them from the tire too I think.