|
|
|||||||
| Lifted Golf Carts Off-Road Golf Carts. |
  |
|
|
Thread Tools | Display Modes |
01-24-2023, 12:21 PM
|
#171 |
|
Not Yet Wild
Join Date: Jul 2012
Posts: 45
|
Re: Fully Independent Suspension Build
Have you made any more progress with the cart?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
02-01-2023, 02:06 PM
|
#172 |
|
Gone Wild
Join Date: Jul 2008
Posts: 228
|
Re: Fully Independent Suspension Build
Not really. I got the steering put in but, I’m not happy with the solution. Although the bump steer is gone my turning radius has suffered a lot.
I’ve been working so much lately I had to put the cart on the back burner for a little bit. Hopefully I can get back to it soon.  Sent from my iPhone using Tapatalk |
|
|
|
|
02-01-2023, 06:29 PM
|
#173 |
|
Gone Wild
Join Date: Jul 2008
Posts: 228
|
Re: Fully Independent Suspension Build
Got motivated a little today and reconfigured the steering set up. It’s GOOD. Virtually no bump steer and excellent turning radius again. YES! [emoji119]
   Sent from my iPhone using Tapatalk |
|
|
|
|
02-02-2023, 07:31 AM
|
#174 |
|
Gone Wild
 Join Date: Oct 2012
Location: Southwestern Pa.
Posts: 5,917
|
Re: Fully Independent Suspension Build
Do you ever sleep?
 |
|
|
|
|
02-02-2023, 08:56 AM
|
#175 |
|
Gone Wild
Join Date: Nov 2009
Location: Picayune, Mississippi
Posts: 858
|
Re: Fully Independent Suspension Build
The look on the dogs face says " come on get this finished I wanna go for a ride"
|
|
|
|
|
02-02-2023, 08:19 PM
|
#176 |
|
Gone Wild
Join Date: Jul 2008
Posts: 228
|
Re: Fully Independent Suspension Build
Working on brakes. Tried uploading pics but Tapatalk is having problems.
Sent from my iPhone using Tapatalk |
|
|
|
|
02-03-2023, 08:57 AM
|
#177 |
|
Gone Wild
Join Date: Oct 2012
Location: Southwestern Pa.
Posts: 5,917
|
Re: Fully Independent Suspension Build
Brakes are a good thing. 👍
|
|
|
|
|
02-03-2023, 11:30 AM
|
#178 |
|
Gone Wild
Join Date: Jul 2008
Posts: 228
|
Re: Fully Independent Suspension Build
For those with eagle eyes, you’ll notice the top left mounting bolt for the front A arm is out and the arm is about a half inch outside the existing hole. That’s because I was able to determine that this mount needs to be extended that half inch in order to get the camber to match the opposite side more closely. So I’m going to rebuild that mounting tab today before I mount the front brake calipers.
 Sent from my iPhone using Tapatalk |
|
|
|
|
02-03-2023, 11:35 AM
|
#179 |
|
Gone Wild
Join Date: Jul 2008
Posts: 228
|
Re: Fully Independent Suspension Build
Rear brake mock up. I cut the mounting brackets out last night. These Miata calipers and discs are going to work pretty well I believe. I’m planning on using the cable actuated parking brake part of the caliper to make cutting brakes since the differential in the axle is open. If it works it should be fun making really tight turns and being able to get traction when one wheel breaks loose, etc.
 Sent from my iPhone using Tapatalk |
|
|
|
|
02-03-2023, 11:37 AM
|
#180 |
|
Gone Wild
Join Date: Jul 2008
Posts: 228
|
Re: Fully Independent Suspension Build
My 10” wheels were making it impossible to get the rear brakes to work even with the mechanical disc brake set up I bought. So I went ahead and order 14” wheels and tires to ensure clearance of the calipers in the rear. They should be here in a few days.
 Sent from my iPhone using Tapatalk |
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Rear Independent Suspension | Lifted Golf Carts | |||
| G1 independent suspension bigblock | Lifted Golf Carts | |||
| got my independent front suspension done | Lifted Golf Carts | |||
| front ATV suspension build | Design Center | |||
| '02 CC independent front suspension | Gas Club Car | |||
Linear Mode
