01-02-2022, 10:28 PM | #1 |
Not Yet Wild
Join Date: Jan 2022
Posts: 1
|
EZGO TXT 2004 Alltrax upgrade
Hi all,
I just finished upgrading my 2004 TXT 36v with a plum quick bandit, 3 big battery Eagle lithium batteries, an alltrax SR48600 and Curtis SW180 48v solenoid. When I connect everything nothing is happening. After plugging in my computer to the controller, the status LED blinks green and the monitor app says the controller is getting 50.1 volts. Can anyone help with common errors I might be facing? From what I can tell I’ve got everything connected properly. Thanks! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-03-2022, 08:24 AM | #2 |
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,590
|
Re: EZGO TXT 2004 Alltrax upgrade
The app should tell you all of the signals going to the Alltrax. Great for troubleshooting.
|
01-03-2022, 08:31 AM | #3 |
Gone Wild
Join Date: Oct 2012
Location: Southwestern Pa.
Posts: 6,330
|
Re: EZGO TXT 2004 Alltrax upgrade
When you push the throttle does the controller green light come on? Do this without your computer hooked up.
When you push the throttle does your Solenoid click? |
01-03-2022, 09:28 AM | #4 |
Gone Wild
Join Date: Mar 2020
Location: Tampa Bay
Posts: 248
|
Re: EZGO TXT 2004 Alltrax upgrade
Triple check motor connections. Same thing happened to me, I just had 2 wires at motor mis-placed.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
EZGO DCS Alltrax XCT 48400 upgrade not running | Electric EZGO | |||
97 EZGO TXT - Alltrax XCT400DCS/200 SOL Upgrade - Wiring check | Electric EZGO | |||
2004 EZGO TXT SERIES Upgrade questions | Electric EZGO | |||
EZGO Alltrax 500 Controller ans Solenoid Upgrade | Electric EZGO | |||
2004 G22E Controller Upgrade to Alltrax | Electric Yamaha |