|
11-19-2012, 06:53 PM | #1 |
Not Yet Wild
Join Date: Oct 2012
Location: Nova Scotia, Canada
Posts: 10
|
Unknown parts in my lift kit?
A friend of mine gave me a 6" drop spindle lift kit for my Club Car Precedent. I don't know the brand..It came with 2 flat plates (approx 2"x4") that had a small hole in their centers. There are some bolts, washers, and nuts to go with the plates too. Where do these plates fit?
|
11-19-2012, 07:54 PM | #2 |
Gone Wild
Join Date: Feb 2010
Posts: 271
|
Re: Unknown parts in my lift kit?
Can you post a picture? Almost sounds like a spring spacer or something if it only has a centr hole.
|
11-19-2012, 08:58 PM | #3 |
Not Yet Wild
Join Date: Oct 2012
Location: Nova Scotia, Canada
Posts: 10
|
Re: Unknown parts in my lift kit?
Here is a pic...
|
11-20-2012, 08:39 AM | #4 |
Gone Wild
Join Date: Feb 2010
Posts: 271
|
Re: Unknown parts in my lift kit?
Install video here that might help. Looks like may be same kit type.
http://www.diygolfcart.com/RHOX-6-in...p/lift-101.htm FYI - About 19 mins in on the video they call it a leveling plate and it's used below rear spacer block. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Unknown problem | Electric Club Car | |||
Unknown controller #1 | Electric golf carts | |||
Unknown Wire | Electric Yamaha | |||
unknown cart | Electric Club Car |