|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-31-2020, 11:55 AM | #1 |
Not Yet Wild
Join Date: May 2014
Posts: 10
|
Bypass RXV receptacle reed switch???
Hello all. I have a 2005 EZGO TXT 36 that I converted to 48 with the Alltrax 400 controller and upgraded solenoid. Recently changed chargers and it required swapping the receptacle to the RXV 48 triangle. It has four wires, one of which is a signal wire (blue). I have the wires connected to positive post as should be, and negative wire to negative post on main pack. The blue wire is the mystery. Solenoid will not click with it disconnected. And assuming it might wan to connect to the old reed switch circuit I made that connection. Nothing there either.
So now I am confused as to what I have gotten myself into. Any suggestions? Thanks everyone. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-31-2020, 12:37 PM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Bypass RXV receptacle reed switch???
It does connect to the old reed switch circuit.
|
Tags |
reed switch, rxv, t48, txt 48 |
|
|
Similar Threads | ||||
Thread | Forum | |||
Reed Switch Bypass | Electric EZGO | |||
2013 TXT48v bypass reed switch | Electric EZGO | |||
2011 ezgo 48 volt reed switch bypass | Electric EZGO | |||
reed switch bypass pic. | Electric EZGO | |||
How to bypass reed switch | Electric EZGO |