Jakes 6” spindle lift modification

[Drhaeker]

Hey guys I’ve got a question before I jump into putting a 6” Jake’s spindle lift on my g29. So I found a 6” spindle lift from a guy for $125 that has barely been used but it’s for a g22. I did some research and the front spindles are the same so I should have no problems there. On the rear it looks like my shock mounts are a bit narrower and my sway bar attaches slightly higher that the g22. The shock yoke should be no problem, just cut out the inch or so I don’t need and re weld but I’m not sure where to redrill my holes on the sway bar bracket? Does anyone have a g29 bracket they could measure and let me know? And is there anything I’m just totally overlooking? Thanks!