lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Garage and Workshop
Garage and Workshop Tips & Ideas for the garage or workshop.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 10-02-2019, 12:51 PM   #1
Vandy_Guy
Not Yet Wild
 
Join Date: May 2019
Posts: 50
Default Running wire from roof LED bar

Hello! Need some help figuring out the best place to route wiring on my 2014 EZ GO Express. I will be installing an LED light bar across the front part of the roof and need the wiring to obviously run down into the rocker switch and battery. Any ideas on how to run the wiring without running a tube down the strut? Any method to fishing it through the strut and out at a certain point? Any recommendations/pics will be greatly appreciated.

Thanks!
Vandy_Guy is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 10-24-2019, 06:22 PM   #2
MikeO4x4
Not Yet Wild
 
Join Date: Oct 2019
Posts: 1
Default Re: Running wire from roof LED bar

Put some lite string on the end of the wires and use a shop vac to pull the string through the tubing then pull the wire through
MikeO4x4 is offline   Reply With Quote
Old 10-25-2019, 02:38 PM   #3
Vandy_Guy
Not Yet Wild
 
Join Date: May 2019
Posts: 50
Default Re: Running wire from roof LED bar

Quote:
Originally Posted by MikeO4x4 View Post
Put some lite string on the end of the wires and use a shop vac to pull the string through the tubing then pull the wire through
Thanks for the tip!
Vandy_Guy is offline   Reply With Quote
Old 10-25-2019, 02:50 PM   #4
LabRat
Gone Wild
Mixed Breed
 
Join Date: May 2019
Location: Georgia
Posts: 389
Default Re: Running wire from roof LED bar

great tip,
nothing looks worst than an exposed wire hanging off of a roof struct.
LabRat is offline   Reply With Quote
Old 10-28-2019, 12:45 PM   #5
VinHay
Not Yet Wild
 
Join Date: Sep 2017
Posts: 13
Default Re: Running wire from roof LED bar

Wow...that's a great idea. I am installing lights tonight and plan to use this!
VinHay is offline   Reply With Quote
Old 11-06-2019, 07:23 PM   #6
cgtech
Over This Interview Is...
 
cgtech's Avatar
Yamaha
 
Join Date: Jun 2012
Location: AZ
Posts: 17,449
Default Re: Running wire from roof LED bar

I always use bailing wire to fish wires through the post, but will have to try that idea. Be sure to keep the wires away while vacuuming the string, vacuum makes huge amounts of static electricity. 8,000 volts and sensitive electronics are not friends ....
cgtech is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Garage and Workshop


Thread Tools
Display Modes


Similar Threads
Thread Forum
Question on running wire from key switch to voltage reducer Electric EZGO
How to wire Brake Turn Signal and Running Lights Together Gas EZGO
running slow / hot cable wire Electric EZGO
Running Wire Thru Top Supports Electric Club Car
Running wires through roof support bars? Design Center


All times are GMT -5. The time now is 04:02 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.