|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
03-27-2019, 07:56 PM
|
#21 |
|
Not Yet Wild
Join Date: Mar 2019
Posts: 19
|
Re: 2014 TXT 48V wont run (i think wiring issue)
Charging port is good. Solenoid is good. ITS and Micro switch are good. All voltages going into wiring harness are correct. Motor is functional ( Did a test by running power directly to it). The only thing left is the controller. All the tests point to the controller being faulty. Any last tests anyone can think to try before I buy a new controller?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-28-2019, 10:24 AM
|
#22 |
|
Techno-Nerd
 Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 2014 TXT 48V wont run (i think wiring issue)
The TXT-48 has a walkaway safety feature that uses max regen braking to limit the cart to about 2MPH to prevent the cart from rolling downhill if the parking brake isn't set.
With Run/Tow switch in Run, try to push or pull cart (by hand) more than 2MPH. The beeper should beep rapidly, the solenoid should click and regen braking should resist cart movement. If the beeper beeps and the solenoid (which is know to work) doesn't click, the controller is bad. (Solenoid driver defective). Replace with an Alltrax XCT48400 or larger, which is user programmable. |
|
|
|
|
03-29-2019, 05:10 PM
|
#23 |
|
Not Yet Wild
Join Date: Mar 2019
Posts: 19
|
Re: 2014 TXT 48V wont run (i think wiring issue)
So the beeper beeped, the solenoid did NOT click but it seemed like there was still some resistance when I️ was pushing it. It was more difficult to push when I️ had the run/tow set to run even though the solenoid didn’t click. Still think it’s a bad controller?
|
|
|
|
|
03-30-2019, 11:39 AM
|
#24 | |
|
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 2014 TXT 48V wont run (i think wiring issue)
Quote:
Replace it with a Alltrax XCT48500, or larger. |
|
|
|
|
|
04-15-2019, 03:34 PM
|
#25 |
|
Gone Wild
Join Date: Apr 2010
Location: Stringer, MS
Posts: 200
|
Re: 2014 TXT 48V wont run (i think wiring issue)
With this test and you get no beeps, def solenoid?
|
|
|
|
|
| Tags |
| 48v, controller, ezgo, txt |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 2014 Club Precedent wont go | Electric Club Car | |||
| 2014 Clutch issue | Gas Yamaha | |||
| 2014 EZGO Txt WONT MOVE!! | Electric EZGO | |||
| 2014 Ezgo txt/t48 issue | Electric EZGO | |||
| G2 wont kick, possible wiring issue | Gas Yamaha | |||
Linear Mode
