|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
08-01-2019, 11:07 AM | #1 |
Not Yet Wild
Join Date: Aug 2019
Posts: 10
|
Jakes 4" lift just installed on DS, front end pops on any flex.
Searched a bunch for this, couldn't find anything specific. I did go back and re-tighten everything down. I get a pop/creak from any flex in the front end. Im not talking crazy flex, just going over any small grades/curbs. I assumed getting this A arm kid would help with the flex, but the steel plate/frame that comes with the kit seems to be flexing quite a bit, I added more washers and tightened down the one bolt connecting the leaf springs to the frame. That seems to be more the source of the problem. Im running out of ideas, has anyone else experienced this?
Any help or input is appreciated. Thanks Matt. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-01-2019, 01:40 PM | #2 |
Bonafide Nincompoop
Join Date: Dec 2015
Location: Charlottesburg Va
Posts: 8,987
|
Re: Jakes 4" lift just installed on DS, front end pops on any flex.
Did you check the frame for any cracks or cracked welds? Sounds like the crossmember between the front rails is loose on one side.
|
08-10-2019, 04:53 PM | #3 | |
Not Yet Wild
Join Date: Aug 2019
Posts: 10
|
Re: Jakes 4" lift just installed on DS, front end pops on any flex.
Quote:
Matt. |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
jakes 6" lift trouble aligning front end | Electric Yamaha | |||
Jakes 6" lift kit front tires are slanted in | Lifted Golf Carts | |||
Installed 6" Jakes Lift - Now no Brakes! | Electric Club Car | |||
Installed spindle lift- now lots of pops and creaking | Lifted Golf Carts | |||
My Jakes 6" Lift is now installed | Gas Yamaha |