Z06 Graduates to 48V!

Otter70 · 10-13-2008, 09:20 PM

Where can i get the proper diode and pre-charge resistor for installing an alltrax AXE 4844 in a yamaha 36v serires cart and the diode and the pre-charge resistor for installing an alltrax AXE 4855 in a EZGO 48v upgrade series cart?

Thanks for the help.

Nate · 10-14-2008, 04:09 PM

This diode will work:

http://www.radioshack.com/search/ind...gkw=diode&sr=1

Use this part number and get a 1N4003 wherever you wish.

This resistor will work:

http://parts.digikey.com/1/parts/841...3geyj221v.html

You can use 200 ohm to 320 ohm, 10W to 25W and check your local electronics store.

Otter70 · 10-14-2008, 04:43 PM

Thanks Nate, your definetly the Man when it comes to this stuff.

tn2tool · 10-14-2008, 07:58 PM

Gorno, how are those energizers holding up? I need new batts for my club car but don't want to afford the $150.00 each for trojans at the local ezgo shop.

gornoman · 10-14-2008, 08:01 PM

All batteries within .05v of each other, range is still fine, power and speed holding to original posted results. Still the fastest all-around cart in camp!

craigy · 12-02-2008, 02:15 PM

Quote:

Originally Posted by gornoman

No cart wiring changes were made other than moving the white charger wire upstream. This leaves all of the cart's control wiring @ 36vdc. The stock solenoid operates by 36v on the primary like it always did, and the secondary passes 48v from the pack. Been working great ALL SUMMER!

Gorno, I am having some hair pulling attempts in trying to understand how and where the second solenoid is located in and wired into this system. Do you have a(simple) diagram of the entire system? I realize that I am not an electrician, but if I can see the diagram drawn out, I know I can understand and duplicate it. Thanks.

gornoman · 12-02-2008, 07:21 PM

Craig, you have a PM.

roaddirt · 03-21-2010, 09:39 PM

Hi, I seen a thread where you coverted your 36v ezgo to a 48v. Somebody asked for a diagram so they can see how the solenoids were wired and everything. I was wondering if you still have that information? If so I would like to see it! lol Thanks

Kevin

gornoman · 03-21-2010, 09:46 PM

Kevin, a modern controller cart only has 1 solenoid. Is there something specific you need to know?

jshell1865 · 03-28-2010, 01:34 PM

Gornoman,

Any chance you can send me a PM with that wiring diagram? I am interested in installing 2 more 6 volt batteries and would like to mirror your 36 to 48setup.

Thanks,

Jeb

2006 Txt, 36 Volt, Alltrax 4855 (500A), 6" lift, 22x11x10 Tires
Stock Solenoid, Motor and F/R Switch

10-13-2008, 09:20 PM	#21
Otter70 Gone Wild Join Date: Feb 2008 Location: Virginia Beach, Virginia Posts: 234	Re: Z06 Graduates to 48V! Where can i get the proper diode and pre-charge resistor for installing an alltrax AXE 4844 in a yamaha 36v serires cart and the diode and the pre-charge resistor for installing an alltrax AXE 4855 in a EZGO 48v upgrade series cart? Thanks for the help.

10-14-2008, 04:09 PM	#22
Nate Gone Wild Join Date: Dec 2006 Posts: 679	Re: Z06 Graduates to 48V! This diode will work: http://www.radioshack.com/search/ind...gkw=diode&sr=1 Use this part number and get a 1N4003 wherever you wish. This resistor will work: http://parts.digikey.com/1/parts/841...3geyj221v.html You can use 200 ohm to 320 ohm, 10W to 25W and check your local electronics store.
Nate Gone Wild Join Date: Dec 2006 Posts: 679

10-14-2008, 04:43 PM	#23
Otter70 Gone Wild Join Date: Feb 2008 Location: Virginia Beach, Virginia Posts: 234	Re: Z06 Graduates to 48V! Thanks Nate, your definetly the Man when it comes to this stuff.

10-14-2008, 07:58 PM	#24
tn2tool Getting Wild Join Date: Aug 2008 Location: Central Ohio Posts: 78	Re: Z06 Graduates to 48V! Gorno, how are those energizers holding up? I need new batts for my club car but don't want to afford the $150.00 each for trojans at the local ezgo shop.

10-14-2008, 08:01 PM	#25
gornoman Stay thirsty my friends! Join Date: Jan 2007 Location: Suburban Chicago Posts: 24,284	Re: Z06 Graduates to 48V! All batteries within .05v of each other, range is still fine, power and speed holding to original posted results. Still the fastest all-around cart in camp!

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

12-02-2008, 07:21 PM	#27
gornoman Stay thirsty my friends! Join Date: Jan 2007 Location: Suburban Chicago Posts: 24,284	Re: Z06 Graduates to 48V! Craig, you have a PM.

03-21-2010, 09:39 PM	#28
roaddirt Not Yet Wild Join Date: Dec 2008 Posts: 1	Re: Z06 Graduates to 48V! Hi, I seen a thread where you coverted your 36v ezgo to a 48v. Somebody asked for a diagram so they can see how the solenoids were wired and everything. I was wondering if you still have that information? If so I would like to see it! lol Thanks Kevin
roaddirt Not Yet Wild Join Date: Dec 2008 Posts: 1

03-21-2010, 09:46 PM	#29
gornoman Stay thirsty my friends! Join Date: Jan 2007 Location: Suburban Chicago Posts: 24,284	Re: Z06 Graduates to 48V! Kevin, a modern controller cart only has 1 solenoid. Is there something specific you need to know?

03-28-2010, 01:34 PM	#30
jshell1865 Not Yet Wild Join Date: Mar 2010 Location: Mobile, AL Posts: 12	Re: Z06 Graduates to 48V! Gornoman, Any chance you can send me a PM with that wiring diagram? I am interested in installing 2 more 6 volt batteries and would like to mirror your 36 to 48setup. Thanks, Jeb 2006 Txt, 36 Volt, Alltrax 4855 (500A), 6" lift, 22x11x10 Tires Stock Solenoid, Motor and F/R Switch

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode