|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
05-19-2022, 07:47 AM | #1 |
Not Yet Wild
Join Date: Jul 2018
Location: London
Posts: 1
|
G16/G22 Clutch Roller dimensions
I'm trying to repair a friends G22 which has suffered the all too common clutch roller failure (all 3 have huge flat spots and one has worn sufficiently to allow the weight to fling out too far jamming the clutch in the fully closed position).
Being in the UK, parts are either hard to get or insanely expensive (the one place I can find them has the rollers at >$100 per roller). I was thinking I might be able to replace the rollers with a roller bearing of an appropriate size but, not having the clutch to hand, I can't measure them. Does anyone have a new roller they can measure for me? In particular the shaft diameter and the length (I believe the outside diameter is 0.625" / 15.9mm). If I can find any suitable replacements, obviously I'll share the part numbers etc! Many thanks John |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Rapid Response Roller Clutch | Golf Carts and Parts | |||
Roller Clutch For Big Block | Golf Carts and Parts | |||
EZ-GO-All 13hp TXT/RXV/ EXPRESS w/roller clutch | Gas EZGO | |||
Roller Clutch from CPP Question | Big Block Talk! | |||
Removing worn clutch roller | Gas Yamaha |