lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Lifted Golf Carts
Lifted Golf Carts Off-Road Golf Carts.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 02-18-2021, 10:43 AM   #1
Ezgeaux
Not Yet Wild
 
Join Date: Aug 2020
Posts: 18
Default Lift kit Identification

Iíve had this cart for about 6 months and recently replaced the rear springs with dual action leafs. I noticed the rear lift seemed odd. Itís not really a block, but rather 4 spacers/sleeves that each bolt goes through which lifts the rear of the cart. This seems like not the best way to lift the rear for stability purposes (or is it ok?). Canít find any pictures of this online. The front is a spindle lift which looks like Allsports spindles? If this is in fact an older all sports lift of some sort, could I replace the weird rear lift with some blocks and U bolts? And finally, how to measure to determine exactly what size lift this is? The rear spacers things are about 4Ē long. I have 22x10x10 tires and clear them with not problems. Thanks!
Attached Images
File Type: jpg EAA7D48E-BD21-4ECC-B4EB-B31A983CD3E2.jpg (217.2 KB, 0 views)
File Type: jpg 06814DC7-CB2B-462C-B260-2325E07421C7.jpg (172.2 KB, 0 views)
Ezgeaux is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 02-19-2021, 08:14 AM   #2
BBBHC
Gone Wild
 
BBBHC's Avatar
Club Car
 
Join Date: Jul 2018
Location: Central Ohio
Posts: 1,618
Default Re: Lift kit Identification

I can't give an answer as to the brand of spindles you have on there. I'd be willing to bet that the rear lift is a home made lift and not from a company. However, I've only been in to GCs for a couple years now, so maybe some folks that have been around longer will know better. I agree with you, that the way that is set up is not optimal.
BBBHC is offline   Reply With Quote
Old 02-19-2021, 04:13 PM   #3
crash12888
Gone Crazy
 
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 5,150
Default Re: Lift kit Identification

I'm thinking it's homemade in the back but can you just buy the drop spindles by themselves?(asking everyone), I'm not sure.
I've removed something similar but they had used 1/2" square tubing, very sketchy in my opinion.
Up front, 1 1/2" square tubing between the frame and spring and then square tubing between spring and axle, didn't even fit properly.
You work on them long enough you see some horrible stuff!!!

Anyone remember the kid that wanted to make his lift out of wood?
crash12888 is offline   Reply With Quote
Old 02-20-2021, 10:02 AM   #4
Wakko47
Gone Loco
 
Wakko47's Avatar
Club Car
 
Join Date: Jul 2020
Location: South Florida
Posts: 1,058
Default Re: Lift kit Identification

The original spindle would have been where your zerk fitting is, I'd speculate. Measure the centerline of the spindle to the zerk...looks like 3-4". That front does not look home made, so I doubt the rear is as well. I don't see any reasons why it would be unstable.
Wakko47 is offline   Reply With Quote
Old 02-22-2021, 12:53 PM   #5
Z7What
Gone Wild
 
Z7What's Avatar
Club Car
 
Join Date: Jul 2020
Location: South Louisiana
Posts: 212
Default Re: Lift kit Identification

Wow that rear "lift" does look sketchy af. I would for sure remove that and install a lift block.

Wayne
Z7What is offline   Reply With Quote
Old 02-22-2021, 11:47 PM   #6
Ezgeaux
Not Yet Wild
 
Join Date: Aug 2020
Posts: 18
Default Re: Lift kit Identification

Thanks for the input guys. Anyone know where to find only rear lift blocks?
Ezgeaux is offline   Reply With Quote
Old 02-25-2021, 08:53 AM   #7
1970buick
Gone Wild
 
1970buick's Avatar
 
Join Date: Jul 2012
Location: maryland
Posts: 806
Default Re: Lift kit Identification

Check autozone or your local equivalent. They all used to carry blocks
1970buick is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Lifted Golf Carts


Thread Tools
Display Modes


Similar Threads
Thread Forum
Lift Identification Lifted Golf Carts
Need help with identification Gas EZGO
Need help with identification Electric EZGO
Need identification help!!!!! Gas Yamaha
Lift kit Identification PICS Electric Club Car


All times are GMT -5. The time now is 07:52 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.