|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
04-13-2017, 10:01 AM | #1 |
Not Yet Wild
Join Date: Sep 2015
Location: So Cal
Posts: 47
|
Installing Alltrax controller
Hey guys, I previously had an upgraded controller (51-42L500NN0S) and fried it when I was installing my HD F&R.
I have now gone with the Alltrax SR. Based on the images in the manual, I cannot figure out what small wires go where! Attached is an image of how I had the old controller upgraded and a picture of the new one. I believe I have the M-, B-, and B+ correct (I did the exact same wiring as the old controller), just not the small cables. Any help would be so nice! This is on a series Club Car 48V. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-13-2017, 10:49 AM | #2 |
Gone Wild
Join Date: Nov 2016
Location: Wilmington NC USA
Posts: 268
|
Re: Installing Alltrax controller
If you fried one upgraded control and now have doubts about your new installation you should get someone to help you in person
Lucky for you the altrax is reverse polarity protected. Sorry for your bad luck. |
04-13-2017, 10:50 AM | #3 |
Not Yet Wild
Join Date: Sep 2015
Location: So Cal
Posts: 47
|
Re: Installing Alltrax controller
LOL... No it was a buddy of mine who said he had the cable on S1 or A1... And he had them swapped. Oh well lol.
|
04-13-2017, 10:58 AM | #4 |
Gone Wild
Join Date: Nov 2016
Location: Wilmington NC USA
Posts: 268
|
Re: Installing Alltrax controller
Someone may be interested in the 51-42L500NN0S to rebuild it.
Its a decent 500 amp controller thats worth rebuilding. |
04-13-2017, 11:12 AM | #5 | |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Installing Alltrax controller
Quote:
Your small wire connections are simple to the SR control as the diagram shows. The #1 red wire goes to J1 red The #2 purple wire goes to J5 The #3 yellow wire goes to J4 |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Installing an alltrax 500amp controller and HD solenoid | Electric Club Car | |||
Installing an Alltrax controller in 30 sec (video) | Extreme DC! | |||
Installing Alltrax 400 and hd solenoid | Electric EZGO | |||
HELP PLEASE Continous Power to my cart after installing Alltrax controller | Electric EZGO | |||
Installing new controller | Electric EZGO |