|
04-17-2008, 07:35 PM | #1 |
Getting Wild
Join Date: Oct 2007
Location: out in New Mexico & yes it's in the U.S.A.
Posts: 103
|
micro switches
Can the micro switches on the forward and reverse lever be adjusted?
It's on my 90 marathon.When looking from the passenger side when you put it in reverse it looks like the switch should go into a little indention but doesn't.This is looking from the back. Ritchie |
04-17-2008, 09:12 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: micro switches
Puller, the micro switch is similar to the light switch on the wall. It is either on or off...Check it for function with a volt meter. If it is not coming on or off then you can adjust or tweek the metal spring arm if needed or replace it if you can't make it work. Hope this helps....
|
04-17-2008, 09:15 PM | #3 |
Getting Wild
Join Date: Oct 2007
Location: out in New Mexico & yes it's in the U.S.A.
Posts: 103
|
Re: micro switches
thanks
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Can The Micro Switch Short Out? | Gas Yamaha | |||
micro switch | Electric EZGO | |||
Micro switches | Gas Club Car |