|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
|
03-28-2010, 12:58 PM | #1 |
Getting Wild
Join Date: Dec 2009
Location: Butler, PA
Posts: 106
|
Clutch removal?
Well, It's raining, Nascar is delayed, and I'm waiting for the body to come back from the paint shop. I thought I would try and tackle installing the new Torque kit. Sprayed PB blaster on it, but it wont budge. Dont have a puller, and destroyed a 2x4 beating it to death. Any secrets guys???
|
03-28-2010, 01:42 PM | #2 |
Gone Wild
Join Date: Feb 2009
Location: Not sure yet
Posts: 500
|
Re: Clutch removal?
Stick a pickle fork in between the 2 sheaves and wedge it in. If you have a thin pickle fork an it doesn't pop off, then wedge a chisel inbetween the pickle fork and the sheave, pop it right off. Or you could buy or make your own puller. I do pickle fork and get them off in about 10 seconds.
|
03-30-2010, 03:19 PM | #3 | |
Gone Wild
Join Date: Jan 2010
Location: South florida
Posts: 374
|
Re: Clutch removal?
Quote:
|
|
03-30-2010, 06:54 PM | #4 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,046
|
Re: Clutch removal?
Thanks ZZTOP.
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
03-30-2010, 07:03 PM | #5 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: Clutch removal?
|
03-28-2010, 01:56 PM | #6 |
Getting Wild
Join Date: Dec 2009
Location: Butler, PA
Posts: 106
|
Re: Clutch removal?
I'm afraid to wedge anything between them for fear of "scratching" the face's...
|
03-28-2010, 02:06 PM | #7 |
gone yamaha!
Join Date: Sep 2008
Location: ontario, canada
Posts: 1,424
|
Re: Clutch removal?
you can make your own puller i did and after beating on it for hours, (not a good idea really, you can bend the sheives very easily with a pry.) mine poped off in secs with the puller.
|
03-28-2010, 03:35 PM | #8 |
Gone Wild
Join Date: Nov 2007
Posts: 469
|
Re: Clutch removal?
steering wheel puller at any auto parts suplyer
metric treads |
03-28-2010, 03:40 PM | #9 |
gone yamaha!
Join Date: Sep 2008
Location: ontario, canada
Posts: 1,424
|
Re: Clutch removal?
|
03-28-2010, 04:05 PM | #10 |
Gone Wild
Join Date: Nov 2007
Posts: 469
|
Re: Clutch removal?
I have removed a few using a 2x4 peace of lumber in between the 2 sheaves
After i broke one I made my own puller for it |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
'87 EZ-GO 2 cycle clutch removal | Gas EZGO | |||
G16 Clutch Removal Help | Gas Yamaha | |||
99 EZ GO clutch removal | Gas EZGO | |||
clutch removal | Gas EZGO | |||
Clutch Removal | Big Block Talk! |