|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
04-06-2017, 10:24 PM | #1 |
Gone Wild
Join Date: May 2016
Location: Central Alabama
Posts: 1,042
|
Controller, no Voltage on Field Terminals
Still fighting with this 1997 Club car regen 1 that has been OEM upgraded to Regen 2.
Motor works with power directly connected to motor terminals (bypassing controller) and I finally got the solenoid to click. Now I have Voltage on the controller terminals connected to A1 and A2 (the big wires). However, I have no voltage on the terminals connected to F1 and F2. The voltage at A1 and A2 is battery level voltage and does not vary with pedal. I am guessing this is a potentiometer issue or is could there be another culprit I am missing? Does the field voltage control speed or is the armature voltage also varied for speed control? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-07-2017, 11:07 AM | #2 |
Gone Wild
Join Date: May 2016
Location: Central Alabama
Posts: 1,042
|
Re: Controller, no Voltage on Field Terminals
Bump
|
04-07-2017, 12:06 PM | #3 |
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,123
|
Re: Controller, no Voltage on Field Terminals
IT won't run at all without field voltage. Speed is mostly regulated by armature voltage. Field voltage starts at max to give max torque - then it drops when you get up to speed.
Sounds like your controller is toast. |
04-08-2017, 10:23 AM | #4 | |
Gone Wild
Join Date: May 2016
Location: Central Alabama
Posts: 1,042
|
Re: Controller, no Voltage on Field Terminals
Quote:
Still not 100% sure though, I have three of these identical carts with same controller and none of the three have the same wiring connections/colors, LOL. |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Voltage and Current on XCT Controller | Electric EZGO | |||
2000 PDS no field voltage | Electric EZGO | |||
95 controller over voltage | Electric EZGO | |||
Overheating controller terminals. | Electric Club Car | |||
voltage across the controller | Electric EZGO |