|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-31-2013, 01:58 PM | #1 |
Getting Wild
Join Date: Aug 2012
Location: Pittsburgh
Posts: 92
|
Winch Amps and Voltage Reducer? How many amps can I draw?
Hey guys, anyone have any thoughts here?
If I'm running a 48v to 12v reducer (30amps 400w Scottyb reducer, the blue one) and the winch (2000lb harbor freight) draws 106amps pulling 20001bs (max), can I ever pull 2000lbs or am I restricted to 30amps which would equal only 500lbs? I guess I'm a little unsure here about the voltage reducer and what its able to put out (restrictions) i'm running 6 x 8V trogens in a exgo txt series cart. According to the box specs: 2000 = 106 amp draw 1500 = 80 amp draw 1000 = 55 amp draw 500 = 30 amp draw |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-31-2013, 02:55 PM | #2 |
Getting Wild
Join Date: Aug 2012
Location: Pittsburgh
Posts: 92
|
Re: Winch Amps and Voltage Reducer? How many amps can I draw?
Well I just answered my own question. The winch is limited to 30amps when running through the voltage reducer and therefore will not pull crap lol.
When directly hooked to 12v battery or my case (2x8v=16) there is much much much more power. I feel many people should know this in the sense that your winch will work when hooked up to a voltage reducer for the snow plow but don't try and pull your buggy out of the ditch because it won't. Trust me, i just tested it. I would hate to be in the woods and not know this. It may be common sense for many, but it was not for me and could have be costly lol. In short, I will alligator clip it to the voltage reducer's fuse bus to work the plow, but if I get stuck and actually need the winch, it will be direct wired to the 16v's. I realize I should probably get a separate 12v but don't want to carry the weight unless I make a habit of off roaring and getting stuck. |
03-31-2013, 03:09 PM | #3 |
Gone Wild
Join Date: Aug 2010
Location: Marion, Ohio
Posts: 1,391
|
Re: Winch Amps and Voltage Reducer? How many amps can I draw?
All I know is that my winch came with 6ga fine strand copper cable. I've never heard of a commercially available reducer that could supply it.
|
03-31-2013, 04:11 PM | #4 |
Gone Wild
Join Date: Apr 2012
Location: Georgia
Posts: 378
|
Re: Winch Amps and Voltage Reducer? How many amps can I draw?
I looked and looked and the highest I found was 30 amp reducer. Being that the winch gets limited use I would single out a pair of batteries for 16 volts. just remember that you might need to charge the batteries that are seperated individually to maintain the battery packs total charge.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
amp draw vs welding amps | Extreme DC! | |||
How many amps does a cart draw during charging? | Electric Club Car | |||
How many amps does a cart draw during charging? | Electric EZGO | |||
how many amps does 3.1 HP motor draw | Electric Club Car | |||
Golf Cart Voltage Reducer 48-36 to 12 VOLT (10 AMPS) | Electric golf carts |