02-07-2015, 03:50 PM | #1 |
Not Yet Wild
Join Date: Feb 2015
Posts: 1
|
OH so sad
Well I took my FE290 which is a 2002 year model to a repair shop for a piston over haul.got it back and installed it 3 hours ago and has good spark but blowing gas out the end of carb.the end that the air filter connects to...so what could be wrong.i did not have the carb worked on.oh I just had a gravity feed tank installed just to get it running.my new tank and pump should be here this week.yall think the gravity flow could cause a issue?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-07-2015, 04:09 PM | #2 |
Gone Wild
Join Date: Jul 2008
Location: Reddick IL
Posts: 11,217
|
Re: OH so sad
Valve timing?
|
02-07-2015, 04:55 PM | #3 |
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,900
|
Re: OH so sad
Check the rotation when your trying to start it!
The drive clutch should be turning Clockwise! if not... you have your S/G wires are hooked up backwards! |
02-07-2015, 05:04 PM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: OH so sad
Excessive fuel pressure could be overwhelming the float. Try putting the top of gravity tank level with the carb.
|
02-07-2015, 05:22 PM | #5 |
Gone Wild
Join Date: Jul 2014
Posts: 314
|
Re: OH so sad
Ok checked the rotation all is good there.i took the rigged gravity tank off and let the engine set for awhile.it did back fire one or 2 times but then it shot out mist of gas again from the air filter end of the carb.also took off the OHV cover and both valves are moving ..so what now????
|
02-07-2015, 05:25 PM | #6 |
Gone Wild
Join Date: Oct 2010
Posts: 6,730
|
Re: OH so sad
What exactly is your username???
|
02-07-2015, 05:29 PM | #7 |
DS Drivers Club Founder
Join Date: Jul 2013
Location: Upstate NY
Posts: 3,428
|
Re: OH so sad
|
02-07-2015, 05:30 PM | #8 |
Gone Wild
Join Date: Oct 2010
Posts: 6,730
|
Re: OH so sad
If that's the case, I'd fix it quickly...
|
02-07-2015, 05:31 PM | #9 |
DS Drivers Club Founder
Join Date: Jul 2013
Location: Upstate NY
Posts: 3,428
|
Re: OH so sad
|
02-07-2015, 05:51 PM | #10 |
Gone Wild
Join Date: Jul 2014
Posts: 314
|
Re: OH so sad
I am goldwinger My (DICK HEAD NOSEY ASSS FLIPPIN NEIBOR++ was on here with out me knowing sorry to all.but yes still have both problems as in HIM and my cart.
Hell any way I did talk to the man that did my engine.he told me he just pulled the piston and bored it 0.10 not much and added the new oversize pistion and rings.he said he did not pull anything else.could it be out of timing? or did I get screwed?????????? |