10-13-2008, 09:20 PM | #21 |
Gone Wild
Join Date: Feb 2008
Location: Virginia Beach, Virginia
Posts: 234
|
Re: Z06 Graduates to 48V!
Where can i get the proper diode and pre-charge resistor for installing an alltrax AXE 4844 in a yamaha 36v serires cart and the diode and the pre-charge resistor for installing an alltrax AXE 4855 in a EZGO 48v upgrade series cart?
Thanks for the help. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-14-2008, 04:09 PM | #22 |
Gone Wild
Join Date: Dec 2006
Posts: 679
|
Re: Z06 Graduates to 48V!
This diode will work:
http://www.radioshack.com/search/ind...gkw=diode&sr=1 Use this part number and get a 1N4003 wherever you wish. This resistor will work: http://parts.digikey.com/1/parts/841...3geyj221v.html You can use 200 ohm to 320 ohm, 10W to 25W and check your local electronics store. |
10-14-2008, 04:43 PM | #23 |
Gone Wild
Join Date: Feb 2008
Location: Virginia Beach, Virginia
Posts: 234
|
Re: Z06 Graduates to 48V!
Thanks Nate, your definetly the Man when it comes to this stuff.
|
10-14-2008, 07:58 PM | #24 |
Getting Wild
Join Date: Aug 2008
Location: Central Ohio
Posts: 78
|
Re: Z06 Graduates to 48V!
Gorno, how are those energizers holding up? I need new batts for my club car but don't want to afford the $150.00 each for trojans at the local ezgo shop.
|
10-14-2008, 08:01 PM | #25 |
Stay thirsty my friends!
Join Date: Jan 2007
Location: Suburban Chicago
Posts: 24,291
|
Re: Z06 Graduates to 48V!
All batteries within .05v of each other, range is still fine, power and speed holding to original posted results. Still the fastest all-around cart in camp!
|
12-02-2008, 02:15 PM | #26 | |
Getting Wild
Join Date: Oct 2008
Location: Bandera, Texas
Posts: 116
|
Re: Z06 Graduates to 48V!
Quote:
|
|
12-02-2008, 07:21 PM | #27 |
Stay thirsty my friends!
Join Date: Jan 2007
Location: Suburban Chicago
Posts: 24,291
|
Re: Z06 Graduates to 48V!
Craig, you have a PM.
|
03-21-2010, 09:39 PM | #28 |
Not Yet Wild
Join Date: Dec 2008
Posts: 1
|
Re: Z06 Graduates to 48V!
Hi, I seen a thread where you coverted your 36v ezgo to a 48v. Somebody asked for a diagram so they can see how the solenoids were wired and everything. I was wondering if you still have that information? If so I would like to see it! lol Thanks
Kevin |
03-21-2010, 09:46 PM | #29 |
Stay thirsty my friends!
Join Date: Jan 2007
Location: Suburban Chicago
Posts: 24,291
|
Re: Z06 Graduates to 48V!
Kevin, a modern controller cart only has 1 solenoid. Is there something specific you need to know?
|
03-28-2010, 01:34 PM | #30 |
Not Yet Wild
Join Date: Mar 2010
Location: Mobile, AL
Posts: 12
|
Re: Z06 Graduates to 48V!
Gornoman,
Any chance you can send me a PM with that wiring diagram? I am interested in installing 2 more 6 volt batteries and would like to mirror your 36 to 48setup. Thanks, Jeb 2006 Txt, 36 Volt, Alltrax 4855 (500A), 6" lift, 22x11x10 Tires Stock Solenoid, Motor and F/R Switch |