04-27-2017, 01:28 PM | #1 |
Not Yet Wild
Join Date: May 2009
Posts: 14
|
F&R switch Help on new system
I have purchased a new D&D motor Altrax controller and new solenoid an am upgrading to 48v. Controller is 500 amps.
Can someone recommend an appropriate Forward reverse switch that will handle the higher load? My understanding is that I must replace the stock one, which came from a 2003 MPT ezgo workhorse. Thanks!!! Sent from my iPhone using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-27-2017, 01:38 PM | #2 |
Cave Dweller
Join Date: Apr 2013
Location: Always On The Move
Posts: 22,117
|
Re: F&R switch Help on new system
look here .> http://www.cartsunlimited.net/f---r--switches.html
|
04-27-2017, 02:07 PM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: F&R switch Help on new system
Which motor did you get?
|
04-27-2017, 02:47 PM | #4 |
Not Yet Wild
Join Date: May 2009
Posts: 14
|
Re: F&R switch Help on new system
170-004-0001 from D&D.
40% increase torque motor. Thanks for all the assistance everyone! Sent from my iPhone using Tapatalk |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Convert 4x12V Battery System to a 6x8V System for '05 Precedent ??? | Electric Club Car | |||
Replacing A Lester 48 Volt System with a NEW Self Contained On-Board System | Electric Club Car | |||
2009 Precedent run/tow toggle switch replaced with keyed switch | Electric Club Car | |||
Just got a G9 need to know how to wire ignition switch to push pull switch ASAP! | Gas Yamaha |