|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
06-02-2019, 10:20 AM | #1 |
Gone Wild
Join Date: Jun 2018
Location: Kersey Pennsylvania
Posts: 437
|
FNKEY install on precedent
Ok I have been putting this off for a while now. I bought the alltrax FNKEY to pair with my xtc 500 controller my cart is a 2014 precedent the thing came with a 3 pin connector. Do I dust plug it in and use the tool kit to program the 3 key positions. I couldn’t find any videos on it. Any advice on installing it would be greatly appreciated.
Also i would like to make one of the key positions 10mph and have it set up maximum battery life. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-02-2019, 07:06 PM | #2 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: FNKEY install on precedent
Yes, it plugs into your controller. The you use your tool kit to set up what each position does. It may look intimidating, but it is not. Easy Peasy....
|
06-02-2019, 07:07 PM | #3 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: FNKEY install on precedent
|
06-03-2019, 09:14 AM | #4 | |
Gone Wild
Join Date: Jun 2018
Location: Kersey Pennsylvania
Posts: 437
|
Re: FNKEY install on precedent
Quote:
Do i need to break the battery connection before installing. |
|
06-03-2019, 10:39 AM | #5 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: FNKEY install on precedent
You can and should turn down the amperage as if not, it is going to kick like a mule till it hits the designated RPM's.
No, you can go to Tow if you like but you are only plugging into the controller and not running any power supplies. The controller will actually supply the switch. |
06-03-2019, 09:23 PM | #6 |
Gone Wild
Join Date: Jun 2018
Location: Kersey Pennsylvania
Posts: 437
|
Re: FNKEY install on precedent
I made this plate for it today. I guess i am ready to install. Does anyone know if I will loose my field map or will it pop up on all three settings and i change them each separately.
|
06-04-2019, 05:28 AM | #7 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: FNKEY install on precedent
The field map is not affected by the switch.
Just change the XCT500 from the default "Dual Switch" to "FNKS" and you can set the "Normal", "User 1" and "User 2" tabs to your liking. Keep in mind if You do not need 3 separate modes for driving, you can make the "Normal" mode be a "Kill Switch" to disable the cart. |
06-12-2019, 09:32 PM | #8 |
Gone Wild
Join Date: Jun 2018
Location: Kersey Pennsylvania
Posts: 437
|
Re: FNKEY install on precedent
I was thinking i would like a low speed lots of torque for towing setting. so if i keep the amps up and just lower the RPMs would. I still have the towing power.
|
06-12-2019, 10:01 PM | #9 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: FNKEY install on precedent
Yes you would. Your RPM's on a Sepex refers to your speed.
|
06-12-2019, 10:35 PM | #10 |
Gone Wild
Join Date: Jun 2018
Location: Kersey Pennsylvania
Posts: 437
|
Re: FNKEY install on precedent
Great I have been looking for examples found 1. I know I’ve seen more on this site still searching. Thanks
|
|
|
Similar Threads | ||||
Thread | Forum | |||
XCT install on 07 precedent help needed | Electric Club Car | |||
09 precedent light kit install | Electric Club Car | |||
Amp and Subwoofer install CC Precedent | Electric Club Car | |||
08 Precedent light install | Electric Club Car | |||
Help with Precedent Motor install | Electric Club Car |