|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
09-13-2014, 05:48 AM
|
#1 |
|
Gone Wild
Join Date: Mar 2013
Posts: 495
|
ezgo series cart controller issue
Hello to all the BGW folks. I have a question. I have a Curtis controller that has 4 lugs for the main cable. I got another controller that only has the 3 lugs on it with the A2 lug not there now. Question is what do I do with the A2 cable that I don't have a place for?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
09-13-2014, 07:03 AM
|
#2 |
|
Gone Wild
 Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,544
|
That extra terminal is the plug brake. It can be eliminated, but I can't remember exactly how. Do a search for eliminating plug brake and see what you find.
|
|
|
|
|
09-13-2014, 07:11 AM
|
#3 | |
|
Gone Wild
Join Date: Dec 2013
Location: Athens, Alabama
Posts: 758
|
Re: ezgo series cart controller issue
Quote:
 |
|
|
|
|
|
09-13-2014, 07:33 AM
|
#4 |
|
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: ezgo series cart controller issue
EZGO often used the A2 terminal on the controller as a tie point so they could use a shorter cable between the A2 stud on the motor and the C stud on the F/R switch, so you have may to connect the two cable on the original controller's A2 terminal together to get a cable long enough to reach from the motor to the F/R switch.
Bolt them together tightly with the nut and bolt that had held them on the A2 terminal, thoroughly wrap the connection with electrical tape and secure them so the don't rub against anything and wear through the insulation. OR - get a longer cable. |
|
|
|
|
09-13-2014, 08:30 AM
|
#5 |
|
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: ezgo series cart controller issue
Go to Alltrax' website and download an AXE wiring diagram. It tells you what to do.
|
|
|
|
|
09-13-2014, 03:21 PM
|
#6 |
|
Gone Wild
Join Date: Mar 2013
Posts: 495
|
Re: ezgo series cart controller issue
Wow OK I just unhooked it and didn't hook it to anything. So where does it go to?
|
|
|
|
|
09-13-2014, 03:26 PM
|
#7 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,408
|
Re: ezgo series cart controller issue
2 cables connected to the A2 controller terminal. Essentially, you remove those 2 cable ends from the A2 terminal and bolt them to each other. Making a splice or replace them with one cable
 |
|
|
|
|
09-13-2014, 03:31 PM
|
#8 |
|
Gone Wild
Join Date: Mar 2013
Posts: 495
|
Re: ezgo series cart controller issue
Well on this cart there was only one cable hooked to the A2 terminal and it runs up to the F&R on the bottom or A connection
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| WTB EZGO 5 Pin Series Controller. | Golf Carts and Parts | |||
| controller for an 07 dcs/series cart? | Electric EZGO | |||
| 98 Series cart front leaf spring issue | Electric EZGO | |||
| Club Car Series Controller + EZGO Series Wound Motor | Electric Club Car | |||
| dcx controller in series cart. help? | Electric EZGO | |||
Linear Mode
