|
Design Center Shop tools, fabrication and Paint and Body |
|
Thread Tools | Display Modes |
10-15-2014, 12:17 PM | #1 |
Gone Wild
Join Date: Jul 2008
Location: mass
Posts: 654
|
simple steering wheel puller
over the past weeks I saw a lot of how do I pull my wheel off.from drilling and tapping and cutting and the worst of all hammering on CC the bushings are held in by plastic, they crack, I don't no about the others I haven't broke those yet this works for me and it was cheap to make 1/4x2x16 long flat stock, enough to go under both sides,nut and bolt from old puller,use a screwdriver to lift wheel while tapping it through,line it up,put nut up to flat stock.tighten down, doesn't need a lot of pressure,light tap, pop
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Wanted - Steering Wheel - Adaptor + Wheel | Golf Carts and Parts | |||
Steering wheel puller? | Gas Club Car | |||
Steering wheel | Gas Yamaha | |||
Which Steering Wheel Should I go for? | Electric Club Car | |||
Alignment of Steering Wheel Only - Wheel Base Straight | Gas Yamaha |