Generac engines

mpro26 · 03-26-2012, 06:11 PM

Not sure if anyone is interested, but I have several used Generac V-twin 33 horsepower engines sitting around the shop that Im needing to get rid of. They have tapered shaft for generator application, but could probably be adapted for many uses. They run well and are set up to use propane. Im sure you could put a carb on them and run them as gas engines too. Im in the generator business, so these engines are starting to take up too much shop space. I can ship them from the shop. Located in Jacksonville Fl. Thanks

pachanga90 · 03-26-2012, 07:00 PM

How much are you asking?Is shipping possible?

roady89 · 03-26-2012, 07:03 PM

How much? DIBS after pachanga90 !

mpro26 · 03-26-2012, 07:18 PM

Im thinking, for a complete engine that is tested and runs good, two hundred plus you pay shipping. These engines have starters and all components to make them run, except the fuel regulators. They are currently set up for propane applications. I can also get you any repair parts from generac if you need anything down the line.

roady89 · 03-26-2012, 07:20 PM

Do you happen to have engine model/code numbers? I need to look them up. No biggie though, dont want to make it difficult.

mpro26 · 03-26-2012, 07:27 PM

I can get the model number off the data plate tomorrow. Thanks

bifferd · 03-26-2012, 07:32 PM

How easy is it to convert to gas?

mpro26 · 03-26-2012, 07:39 PM

Bifferd, Im not sure how easy it would be to convert to gas. Im guessing you would have to find the carburetor that came on some models of the same type Generac engines. I think I have one of the 33 hp generac engines that is fairly new, that is a gasoline engine. I will have to check.

bifferd · 03-26-2012, 07:56 PM

I suppose i could leave it running on propane, how is the throttle controlled then, a cart running on propane would be cool thanks brad

mpro26 · 03-26-2012, 08:22 PM

These engines are controlled to run at a constant 3600 rpm, by a mechanical governor on the older engines, and a electronic governor on the more recent engines. However, the governor could be bypassed and a throttle cable installed.

03-26-2012, 06:11 PM	#1
mpro26 Getting Wild Join Date: Apr 2009 Location: Jacksonville, FL Posts: 129	Generac engines Not sure if anyone is interested, but I have several used Generac V-twin 33 horsepower engines sitting around the shop that Im needing to get rid of. They have tapered shaft for generator application, but could probably be adapted for many uses. They run well and are set up to use propane. Im sure you could put a carb on them and run them as gas engines too. Im in the generator business, so these engines are starting to take up too much shop space. I can ship them from the shop. Located in Jacksonville Fl. Thanks

03-26-2012, 07:00 PM	#2
pachanga90 I Refuse To Get Stuck!!! Join Date: Jun 2010 Location: Hilton,NY Posts: 5,427	Re: Generac engines How much are you asking?Is shipping possible?

03-26-2012, 07:03 PM	#3
roady89 nimda Join Date: Jun 2007 Posts: 13,022	Re: Generac engines How much? DIBS after pachanga90 !
roady89 nimda Join Date: Jun 2007 Posts: 13,022

03-26-2012, 07:18 PM	#4
mpro26 Getting Wild Join Date: Apr 2009 Location: Jacksonville, FL Posts: 129	Re: Generac engines Im thinking, for a complete engine that is tested and runs good, two hundred plus you pay shipping. These engines have starters and all components to make them run, except the fuel regulators. They are currently set up for propane applications. I can also get you any repair parts from generac if you need anything down the line.

03-26-2012, 07:20 PM	#5
roady89 nimda Join Date: Jun 2007 Posts: 13,022	Re: Generac engines Do you happen to have engine model/code numbers? I need to look them up. No biggie though, dont want to make it difficult.
roady89 nimda Join Date: Jun 2007 Posts: 13,022

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

03-26-2012, 07:27 PM	#6
mpro26 Getting Wild Join Date: Apr 2009 Location: Jacksonville, FL Posts: 129	Re: Generac engines I can get the model number off the data plate tomorrow. Thanks

03-26-2012, 07:32 PM	#7
bifferd Gone Wild Join Date: Mar 2009 Location: wisconsin Posts: 431	Re: Generac engines How easy is it to convert to gas?

03-26-2012, 07:39 PM	#8
mpro26 Getting Wild Join Date: Apr 2009 Location: Jacksonville, FL Posts: 129	Re: Generac engines Bifferd, Im not sure how easy it would be to convert to gas. Im guessing you would have to find the carburetor that came on some models of the same type Generac engines. I think I have one of the 33 hp generac engines that is fairly new, that is a gasoline engine. I will have to check.

03-26-2012, 07:56 PM	#9
bifferd Gone Wild Join Date: Mar 2009 Location: wisconsin Posts: 431	Re: Generac engines I suppose i could leave it running on propane, how is the throttle controlled then, a cart running on propane would be cool thanks brad

03-26-2012, 08:22 PM	#10
mpro26 Getting Wild Join Date: Apr 2009 Location: Jacksonville, FL Posts: 129	Re: Generac engines These engines are controlled to run at a constant 3600 rpm, by a mechanical governor on the older engines, and a electronic governor on the more recent engines. However, the governor could be bypassed and a throttle cable installed.

Similar Threads
Thread	Forum
30hp Generac generator motor for ezgo limo cart	Big Block Talk!
32 HP Generac?	Big Block Talk!
New 350 cc MCI engines Available!!!!	Gas EZGO
Install a 24hp Generac in a Hyundai cart?	Gas golf carts
Engines for the G9	Big Block Talk!