My EzG0 MPT 1200

[KOZ45]

need to figure out something

The plexiglass or lexan is rattling alot and is super annoying

[Tom12254]

Originally Posted by KOZ45

need to figure out something

The plexiglass or lexan is rattling alot and is super annoying

How is it mounted? An easy/cheap fix could be to just buy some rubber o-rings and put them on the mounting screws/bolts between the lexan and frame. Kind of to act like little rubber isolators between the plastic windshield and metal frame.

[KOZ45]

I had to remove the windshield from the frame

I lined the entire frame with 3M tape and it's solid and quiet now

They cut major corners and only used 4 plastic push pin bolts and dabs of clear silicon

[Timothy L]

Originally Posted by KOZ45

I had to remove the windshield from the frame

I lined the entire frame with 3M tape and it's solid and quiet now

They cut major corners and only used 4 plastic push pin bolts and dabs of clear silicon

I’ve drilled more holes and added extra push pins in mine in the past. Usually helps


Sent from my iPhone using Tapatalk

[KOZ45]

The 3M tape fixed the rattling issues

[KOZ45]

I want to get a tool box for the bed

Probably like a chest style with a top lid

Likely a plastic chest with a top lid

I think the inside width of the bed is 44"

[KOZ45]

I am re doing the bed and storage

I bought a 39" wide black tool box and am building a platform for it to be mounted on

Will get pics up when the project is done

[KOZ45]

Here's the base where the tool box will be mounted

Storage for underneath also

[KOZ45]

Black tool box and tie downs mounted

Very happy with the setup

Fills the bed space nicely, as the box isn't overly too too large

Tool box was $99 on Amazon

[KOZ45]

Extinguisher mounted