|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-08-2020, 02:25 PM | #1 |
Not Yet Wild
Join Date: Feb 2020
Posts: 4
|
Looking to identify EZGO
New to the forum and carts. Recently purchased an older EZGO with a gas engine. Looking for the engine type and model as I need to order a few parts. Specifically a drive hub. It resides in Honduras and I'll also need extras like a fuel pump, cdi, etc that are hard to get down there.Thanks, Any help would be greatly appreciated. It has parts from a few carts and no tags in the glove box.
Photos attached. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-08-2020, 02:54 PM | #2 |
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,666
|
Re: Looking to identify EZGO
Lift up the plastic flap in back of where the seat sits and see if there is sticker there on top the frame. The motor is a 295 or 350cc Robins and by the looks of the rectangular air filter I'd say a pre MCI motor.. cast iron exhaust manifold?
|
03-08-2020, 03:05 PM | #3 |
Not Yet Wild
Join Date: Feb 2020
Posts: 4
|
Re: Looking to identify EZGO
Not sure about the cast iron manifold. The frame has been sanded down, oiled and repaired, pretty sure there are no stickers left. The salt air of the ocean and dirt roads do a number on them. Heading back down in April and I can look. Thanks for the reply. I do have a few other pics that may help.
|
03-08-2020, 03:30 PM | #4 |
Vintage tech
Join Date: Sep 2009
Location: South
Posts: 3,215
|
Re: Looking to identify EZGO
Timing cover looks like a MCI engine. Can't really tell from the pictures. Like Stovebolt said the exhaust manifold will tell you for sure.
|
03-09-2020, 08:43 AM | #5 |
Not Yet Wild
Join Date: Feb 2020
Posts: 4
|
Re: Looking to identify EZGO
I found this marking if it helps.
|
03-09-2020, 02:01 PM | #6 |
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,666
|
Re: Looking to identify EZGO
a picture of the exhaust manifold would help.
|
03-09-2020, 08:51 PM | #7 |
Vintage tech
Join Date: Sep 2009
Location: South
Posts: 3,215
|
Re: Looking to identify EZGO
I do think you got the Subaru Robin MCI engine looking at your coil. These engines were made from 2004 to 2008
|
03-10-2020, 07:29 AM | #8 |
Not Yet Wild
Join Date: Feb 2020
Posts: 4
|
Re: Looking to identify EZGO
Closest image I have to the manifold. Plus another.
|
03-10-2020, 09:27 AM | #9 |
Vintage tech
Join Date: Sep 2009
Location: South
Posts: 3,215
|
Re: Looking to identify EZGO
Still not a good picture of the manifold but you got an MCI engine, I think
|
03-12-2020, 06:39 PM | #10 |
Not Yet Wild
Join Date: Aug 2019
Location: VA
Posts: 51
|
Re: Looking to identify EZGO
Are you looking to buy new parts online or from someone here who has used parts around?
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Need to identify ezgo | Members Rides | |||
Identify my ezgo controller | Electric EZGO | |||
Looking to identify this EZGO | Members Rides | |||
Trying to identify my EZGO - Help. | Electric EZGO | |||
How to identify my ezgo/no tag | Gas EZGO |