|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
06-23-2014, 02:39 PM
|
#1 |
|
Gone Wild
Join Date: Jan 2014
Location: Lafayette, Louisiana
Posts: 1,677
|
Passenger rear brake cable
After installing dual stage leaf it is very close or little to tight. The sheath it very tight and I loosened the cable but the sheath needs about 1/2", without having to swap and reverse the breaks, it there anything else I can try?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-24-2014, 06:41 AM
|
#2 |
|
What the ....?
 Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,927
|
Re: Passenger rear brake cable
Here's a cable extension kit for lifted CC sparkies:
http://www.golfcartking.com/Club-Car...et-p/28000.htm but, I don't see the aluminum cable end extensions with this particular kit, (they look like this): Lynx - Brake cable extentions 010.JPG So, I don't know exactly how the kit works without the cable end extensions.  |
|
|
|
|
06-24-2014, 07:40 AM
|
#3 | |
|
Gone Wild
Join Date: Jan 2014
Location: Lafayette, Louisiana
Posts: 1,677
|
Re: Passenger rear brake cable
That is exactly what I need, I wonder if the kits comes with that or not, I'll ask them about it. I mean all I need is about 1/2" to make it right.
 Thanks Quote:
|
|
|
|
|
|
06-24-2014, 10:05 AM
|
#4 |
|
Gone Wild
Join Date: Jan 2014
Location: Lafayette, Louisiana
Posts: 1,677
|
Re: Passenger rear brake cable
well that kits is as you see it, no aluminum piece. I think I'll try to make that and see how it goes, I don't need much, also will see if I can adjust the position of the spring assembly some.
|
|
|
|
|
06-24-2014, 10:16 AM
|
#5 |
|
Gone Wild
Join Date: Oct 2009
Location: Alva Fla
Posts: 608
|
Re: Passenger rear brake cable
I made one out of 1-1/2 x 1/4 angle. Just like the pic.
|
|
|
|
|
06-24-2014, 01:47 PM
|
#6 |
|
Not Yet Wild
Join Date: May 2014
Location: East Texas
Posts: 22
|
Re: Passenger rear brake cable
I have the same issue. I just need a 1/2 inch extra on my brake cable. I did buy a longer brake cable but did not realize I would have to take off the floor ect. Did you find a resolution?
|
|
|
|
|
06-24-2014, 02:41 PM
|
#7 |
|
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,927
|
Re: Passenger rear brake cable
If you guys are a halfway decent fabricator (or... know of one)
I did a pretty good write up on my extensions a few years ago! >>> http://www.buggiesgonewild.com/lifte...-brackets.html |
|
|
|
|
06-24-2014, 03:05 PM
|
#8 |
|
Gone Wild
Join Date: Jan 2014
Location: Lafayette, Louisiana
Posts: 1,677
|
Re: Passenger rear brake cable
Nice fix, thanks
|
|
|
|
|
06-24-2014, 11:58 PM
|
#9 |
|
STEALTH 4X4
Join Date: Sep 2011
Location: GA
Posts: 2,125
|
Re: Passenger rear brake cable
|
|
|
|
|
06-25-2014, 07:30 AM
|
#10 |
|
Gone Wild
Join Date: Jan 2014
Location: Lafayette, Louisiana
Posts: 1,677
|
Re: Passenger rear brake cable
Replacing the cable would be the sweetest option LOL
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| WTD- Club Car DS rear brake cable | Golf Carts and Parts | |||
| how to replace passenger side brake line | Gas Club Car | |||
| Can i buy two passenger brake cables instead of driver and passenger | Electric EZGO | |||
| Wanted: G1 rear axle. (passenger side) | Gas Yamaha | |||
| broken axle (passenger rear) weld? | Gas Yamaha | |||
Linear Mode
