10-28-2020, 05:44 AM | #11 |
Gone Wild
Join Date: Nov 2013
Location: Western NY
Posts: 641
|
Re: Tomberlin Vanish wont move
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-29-2020, 10:03 AM | #12 |
Not Yet Wild
Join Date: Aug 2018
Posts: 2
|
Re: Tomberlin Vanish wont move
Flight Systems is good; however, they can not always check under real world conditions. Did you give them a full explanation of the conditions you were experiencing? Have you talked to their tech support?
Sent from my iPhone using Tapatalk |
10-29-2020, 10:45 AM | #13 |
How Can I Help?
Join Date: Oct 2009
Location: SW Wisc & West Central, FL
Posts: 1,383
|
Re: Tomberlin Vanish wont move
You forgot that the main harness doesn't connect directly to the controller. The controller connects to the multipin with a short "jumper" harness which breaks out to the 8 pin and the 2 pin connector which are zip tied to the chassis tube above the left rear wheel and just in front of the controller.
So the wiring diagram is "correct" but it's not showing that jumper harness, just starts with the 8 pin and the 2 pin. |
10-29-2020, 10:52 AM | #14 |
How Can I Help?
Join Date: Oct 2009
Location: SW Wisc & West Central, FL
Posts: 1,383
|
Re: Tomberlin Vanish wont move
Here's a drawing of that jumper harness. Not a schematic but all there is.
|
11-04-2020, 09:29 AM | #15 |
Gone Wild
Join Date: Nov 2013
Location: Western NY
Posts: 641
|
Re: Tomberlin Vanish wont move
Excellent! Thank you.
|
11-04-2020, 12:27 PM | #16 |
Gone Wild
Join Date: Nov 2013
Location: Western NY
Posts: 641
|
Re: Tomberlin Vanish wont move
The vehicle thinks it is in park. The cables are functioning correctly.
Black/Green is the grounding signal from the Park switch. This feeds the Power Controller. Where is the Power Controller located and how does that disable the Danaher controller? |
11-04-2020, 03:13 PM | #17 |
Gone Wild
Join Date: Nov 2013
Location: Western NY
Posts: 641
|
Re: Tomberlin Vanish wont move
And is it safe to say that R3 from the power controller must be high in order to move the car?
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Tomberlin Vanish Stutters | Tomberlin | |||
Tomberlin Vanish Upgrade | Design Center | |||
Tomberlin Vanish Service manual? | Tomberlin | |||
Just picked up a Tomberlin Vanish last night | Tomberlin | |||
Tomberlin Vanish | Tomberlin |