06-28-2020, 02:19 PM | #1 |
Not Yet Wild
Join Date: Aug 2009
Location: North central Ohio
Posts: 6
|
2010 Tomberlin Emerge 5MPH only
My Tomberlin Emerge will only go 5 MPH. The batteries are good, the speedometer functions, speed sensor checks out, no fault codes. With cart on jackstands, pedal floored, Pin 15 on the sepex controller (from ITS)reads only 2.4 VDC to battery common and I'm not sure what the voltage should be. Any info would be appreciated. If the problem is the inductive sensor (Hall effect) in the pedal box, are they available in the states or only by ordering from China? Thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-28-2020, 05:47 PM | #2 |
Gone Wild
Join Date: May 2015
Location: Central Florida
Posts: 2,114
|
Re: 2010 Tomberlin Emerge 5MPH only
With no code flashing, do yourself a favor and Get a scan tool to figure out what it is exactly. Other wise your just going to be guessing.
|
06-30-2020, 11:13 AM | #3 |
Not Yet Wild
Join Date: Aug 2009
Location: North central Ohio
Posts: 6
|
Re: 2010 Tomberlin Emerge 5MPH only
Today I checked with the scan tool and there are no fault codes but when I monitor the throttle input it only goes to 26 % when pedal is down. Probably sensor in pedal box?
|
06-30-2020, 01:26 PM | #4 |
Gone Wild
Join Date: May 2015
Location: Central Florida
Posts: 2,114
|
Re: 2010 Tomberlin Emerge 5MPH only
That's it. Hall Effect sensor is what its called
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Tomberlin 2010 Emerge 500 dead no display | Tomberlin | |||
2010 Tomberlin Emerge Brake lights | Tomberlin | |||
Tomberlin Emerge will not go over 4-5mph | Tomberlin | |||
2010 Tomberlin Emerge Lights | Tomberlin | |||
Help with Wheels on 2010 Tomberlin EMerge | Tomberlin |