Gurus, Looking for info on spring only lift for 2KPDS

[kgsc]

I have a 2000 PDS with old style steering and need about 2 inches lift in the nose. I thought about moving the springs over the axle but concerned the tie rods will hit. I know E-Z-Go makes a mid rise kit(2in lift) for the 2001.5 and up that the front is done just with the HD springs 70989G03P. Anybody know if they will fit what I have ?

Thanks in advance.

[mikesmotortoys]

No - it uses a different leafspring in the front. The mid rise for newer steering uses leafsprings and a longer rear shackle.

You could use our leveling lit for the front - that will add 1 1/2" and if you order HD front springs, that will add an additional 1/2". The rear lift is the easy part...

[kgsc]

Originally Posted by mikesmotortoys

No - it uses a different leafspring in the front. The mid rise for newer steering uses leafsprings and a longer rear shackle.

You could use our leveling lit for the front - that will add 1 1/2" and if you order HD front springs, that will add an additional 1/2". The rear lift is the easy part...

Is that part mmt-lvl ? If so, I may already have that in there. I haven't pulled it apart yet but there is a plate between the spring and the base. Can you give me the part number on the spring?