![]() |
|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
![]() ![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Not Yet Wild
Join Date: May 2011
Posts: 4
|
![]() new to forum. looking for recommendations on replacement controller. looking at remanufactured unit on ebay. any one have any experience with this?
|
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
Gone Wild
Join Date: Mar 2009
Location: Roseville, CA
Posts: 2,757
|
![]() Reman units have had a pretty spotty reputation in past.
If you want one contact one of sponsors here and ask them for an FSIP rebuilt and you should be OK. |
![]() |
![]() |
![]() |
#3 |
Sometime's............
![]() ![]() Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,700
|
![]() I had great experiance/service from OPS.
|
![]() |
![]() |
![]() |
#4 |
Not Yet Wild
Join Date: May 2011
Posts: 4
|
![]() thanks for the advice. any recommendations on a new one?
|
![]() |
![]() |
![]() |
#5 |
Getting Wild
Join Date: Oct 2007
Posts: 97
|
![]() I put a Alltrax 350 from ebay in my g19 - 4 years ago, replaced it and has been working great. You will need to be able to read simple wiring diagram, there are a few wires to cut and splice.
If you go to the Alltrax website they have a bunch of manuals, installation & troubleshooting that you can download for free. I also got rid of the sorry 8v batteries and use 6v x 8 batteries, I put the 2 extra batteries in the back recess aera where the golf bags usually set. This change made a world of difference. |
![]() |
![]() |
![]() |
#6 |
Not Yet Wild
Join Date: May 2011
Posts: 4
|
![]() Thanks, I will check them out.
|
![]() |
![]() |
![]() |
#7 |
Getting Wild
![]() Join Date: Jul 2010
Location: Philly
Posts: 113
|
![]() I hit a bit of a snag with my Alltrax controller. I'm not advising against them - not at ALL - I'm merely pointing out a snag that I hit and how I repaired it.
Check out this thread: http://www.buggiesgonewild.com/elect...-whats-up.html |
![]() |
![]() |
![]() |
#8 |
Not Yet Wild
![]() Join Date: Jun 2011
Location: Phenix City, AL.
Posts: 4
|
![]() I like to get the most amps I can with factory motor which is usually a 400 or 450 amp programmable controller from altrax. That way I can use my laptop to make adjustments to performance.
|
![]() |
![]() |
![]() |
#9 |
Not Yet Wild
Join Date: May 2011
Posts: 4
|
![]() Thanks for all the help
|
![]() |
![]() |
![]() |
#10 |
Not Yet Wild
![]() Join Date: Jun 2011
Location: Phenix City, AL.
Posts: 4
|
![]() Not a problem. Hope it helped out.
|
![]() |
![]() |
![]() |
Tags |
controller, g19, yamaha |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
F/S Yamaha G22 controller | Golf Carts and Parts | |||
Yamaha G16 Speed Controller | Electric Yamaha | |||
WTB used cc engine /Yamaha controller | Golf Carts and Parts | |||
Yamaha g19/g22 controller & solenoid | Golf Carts and Parts | |||
yamaha g14e controller | Extreme DC! |