12-06-2015, 09:15 PM | #1 |
Crazy Wild
Join Date: Jun 2015
Location: Carolina Lowcountry
Posts: 796
|
How To Fill Holes On Body
Getting ready to paint my buggie. Didn't want it to be down while painting
so I went to the GC graveyard and got me a body. Decided not to put plastic rear fender covers back on. So there's holes to fill. Thought I'd show you how I do it. Started with this. Used a ball grinder on a Dremel to bevel holes on both sides. Then cut some wax paper and taped it to outside of body. Mixed some filler and applied from inside of body. Let harden and remove tape. Sand smooth and glaze with putty to fill pinholes. Sand smooth again and you are ready to prime and paint. Muddog |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Tool for cutting out speaker holes in body? | Electric EZGO | |||
how do i fill holes | Design Center | |||
drilling holes in body | Electric Club Car | |||
Filling holes in plastic Yamaha body | Body and Paint | |||
filling holes in a ezgo body | Body and Paint |