![]() |
|
Electric Club Car Electric DS, and Precedent golf cars |
![]() ![]() |
|
Thread Tools | Display Modes |
![]() |
#171 |
Getting Wild
![]() Join Date: Aug 2021
Location: Parrish, Florida
Posts: 117
|
![]() Thank you MyCart84 .. btw most impressive looking cart you have..
|
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#172 |
Getting Wild
![]() Join Date: Nov 2019
Location: Bradenton, Fl
Posts: 112
|
![]() Anytime, and I appreciate that! Hopefully it's just your Mcor, it's a relatively easy swap out if you haven't done one already. There are a few YT vids on the procedure. Keep us posted
|
![]() |
![]() |
![]() |
#173 |
Not Yet Wild
Join Date: Feb 2022
Posts: 12
|
![]() Hello all. Can anyone tell me how the bar is supposed to attach to the other end? I removed the MCOR, amd the bar slid. I didn't notice how it attached. TIA.
|
![]() |
![]() |
![]() |
#174 |
Not Yet Wild
Join Date: Jan 2020
Posts: 10
|
![]() I have a 99 DS with pot box, I was told it was bad so I purchased the 293201 kit
And I plugged it in first to test it before I installed it and it only spins the rear tires slowly however sometimes while playing with pedal it spins real fast. I checked all connections and they seem fine. Any Ideas |
![]() |
![]() |
![]() |
#175 |
Not Yet Wild
Join Date: Jan 2020
Posts: 10
|
![]() The instructions show how it fits.
Did you not get them? |
![]() |
![]() |
![]() |
#176 |
Not Yet Wild
Join Date: Oct 2021
Posts: 2
|
![]() Ok I just finished reading all 18 pages and I still seem to be somewhat confused. I have an 08 Precedent with pedal group 1, but no packing brake left and some sticky pedals and am looking at possibly just upgrading to a pedal group 2 to take care of all the little issues at once. Can I use my MCOR2 with the new group 2 pedal setup? Would I need any conversion kit to do it? I keep seeing conflicting info.
From page 1 “ Generation 2 Pedal Assembly - Can be used with MCOR2, MCOR3, or MCOR4. If you currently have an MCOR2 that needs to be replaced, you have the option of replacing it with another MCOR2 or ordering the MCOR4 conversion kit. Either way works.” And from revolution carts site “ This pedal assembly is a direct fit for ANY YEAR Club Car Precedent. If you have a Gen 1 pedal assembly, this is a direct replacement. Buyers with a Gen1 pedal assembly must also purchase the AM293001 - MCOR4 conversion kit from our store. The MCOR2 that is on your existing pedal assembly will not fit on the Gen 2 assembly.” Thanks |
![]() |
![]() |
![]() |
#177 |
Not Yet Wild
Join Date: Apr 2022
Posts: 3
|
![]() What are the options for a 1995 that has modle number starting with a9515? AM293201 says it has to be a9517 or higher.
|
![]() |
![]() |
![]() |
#178 | |
Gone Wild
![]() Join Date: Dec 2016
Location: Kingsland, Georgia
Posts: 1,807
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#179 |
Not Yet Wild
![]() Join Date: Jul 2016
Location: West Valley Arizona
Posts: 4
|
![]() I have an 09 Precedent and I do have an adapter for the MCOR 2. Does mine have the 461 ohm resistors in the adaptor? I also see that one can order the adaptor kit, enabling one to install an MCOR 4. Is the MCOR 4 better than the MCOR 2?
|
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
05 Gas Club Car Brake pedal assembly | Gas Club Car | |||
i need a picture of a columbia gas pedal assembly. please | Gas Columbia ParCar | |||
Brake Pedal Assembly | Electric EZGO | |||
Mcor & Controler Confusion ????? | Electric Club Car | |||
brake pedal assembly | Electric Club Car |