|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
03-26-2013, 09:51 AM
|
#1 |
|
Not Yet Wild
Join Date: Mar 2013
Location: georgia
Posts: 3
|
96 ezgo 36volt wont go
all batterys are up all cables are good can this be the controller
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-26-2013, 09:52 AM
|
#2 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 72,370
|
Re: 96 ezgo 36volt wont go
It could ...... or it could be the reed switch? or
 with more info and history of the problem. Don't be shy |
|
|
|
|
03-26-2013, 10:02 AM
|
#3 |
|
Not Yet Wild
Join Date: Mar 2013
Location: georgia
Posts: 3
|
Re: 96 ezgo 36volt wont go
the solenoid still clips but cart wont move it started when wife went to move and it made a sizzling noise and has not move since checked all cables look good and tight
|
|
|
|
|
03-26-2013, 10:49 AM
|
#4 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 72,370
|
Re: 96 ezgo 36volt wont go
I am guessing now, but maybe it is a series cart. Shifter by your knee, no toggle switch on the controller cover. The sizzling noise came from the F&R switch, it sounds like low level arc welding. It is the burning contact sound.
Pull the cover and see if one of the contact lugs and cable look like they got hot, discolored or melted jacket. Try wiggling the shifter handle with the peddle depressed and see if the cart lurches forward? or back ? |
|
|
|
|
03-27-2013, 06:52 AM
|
#5 |
|
Not Yet Wild
Join Date: Mar 2013
Location: georgia
Posts: 3
|
Re: 96 ezgo 36volt wont go
im sorry first time on here yes shifter is by the knee and there is a toggle switch for tow and run and the F&R has two micro switches
|
|
|
|
|
03-27-2013, 09:07 AM
|
#6 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 72,370
|
Re: 96 ezgo 36volt wont go
DCS cart ...... hopefully you can find a loose connection someplace in the high amperage delivery system. Start inspecting the end of every cable..... give them a tug and twist test,too.
|
|
|
|
|
03-27-2013, 09:56 AM
|
#7 |
|
Gone Wild
Join Date: Mar 2011
Location: The hills of WV...
Posts: 330
|
Re: 96 ezgo 36volt wont go
scottyb is right.. I went through this with my 96 DCS.. I checked every cable. except for the ones that attach to the motor.. I found a cable that had burned loose back there. I also went through this 1 other time and it was infact a reed swtich.. I just jumped across it, installed a inline 10 amp fuse and have never had a problem with it since.. Knock on wood..
 |
|
|
|
|
03-31-2013, 10:09 PM
|
#8 |
|
Not Yet Wild
Join Date: Mar 2013
Posts: 11
|
Having same issue. Changed out FR component, had burned up, now still won't go. What is reed switch?
SRG Sent from my iPad using Tapatalk |
|
|
|
|
04-01-2013, 12:20 AM
|
#9 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 72,370
|
Re: 96 ezgo 36volt wont go
Reed switch is a safety fuse in the charge receptacle which interrupts the power supply when the charger is plugged in.
If it fails you have no power to the cart ignition system. Here is a pic from one of my old carts |
|
|
|
|
04-01-2013, 06:12 AM
|
#10 |
|
Gone Wild
Join Date: Jan 2013
Location: Sun Lakes, Arizona
Posts: 610
|
Re: 96 ezgo 36volt wont go
What is the purpose of the reed switch?
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 03 ezgo 36volt wont move | Electric EZGO | |||
| 02 36volt club car wont charge | Electric Club Car | |||
| 1992 ezgo 36volt | Electric EZGO | |||
| 2004 ezgo 36volt | Electric EZGO | |||
| 96' 36volt 6 pssenger ezgo | Golf Carts and Parts | |||
Linear Mode
