lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
 
Thread Tools Display Modes
Old 06-27-2011, 01:08 PM   #1
Tcoe13
Not Yet Wild
 
Join Date: Mar 2011
Posts: 17
Default removing the crossbar on the swing arm-G9

can you remove that crossbar that goes under the transmission with out wrecking something? id imagine that the crossbar in front of it would keep it together and the axle tubes too. i just want it gone because its the first thing that touches in mud and sand causing it to get stuck pretty easaly. it gets hung up in ruts too.
Tcoe13 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 06-27-2011, 01:58 PM   #2
TheNewGuy
Admin/Moderator
 
TheNewGuy's Avatar
Yamaha
 
Join Date: Dec 2006
Location: Ohio
Posts: 17,450
Default Re: removing the crossbar on the swing arm-G9

I've never done it, but if you do, I would highly recommend a skid plate under the trans.

TheNewGuy is online now   Reply With Quote
Old 06-27-2011, 06:36 PM   #3
smallblock450sl
Sometime's............
 
smallblock450sl's Avatar
Yamaha
 
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,730
Default Re: removing the crossbar on the swing arm-G9

It is also the front mount for the diff center section. Might lose some transaxle integrity.
smallblock450sl is offline   Reply With Quote
Old 06-27-2011, 08:40 PM   #4
Tcoe13
Not Yet Wild
 
Join Date: Mar 2011
Posts: 17
Default Re: removing the crossbar on the swing arm-G9

Quote:
Originally Posted by TheNewGuy View Post
I've never done it, but if you do, I would highly recommend a skid plate under the trans.
well with or without the crossbar its gonna hit the tranny anyways.

Quote:
Originally Posted by smallblock450sl View Post
It is also the front mount for the diff center section. Might lose some transaxle integrity.
i was kinda worried about that, but there is another bar infront of it. would that be enough?
Tcoe13 is offline   Reply With Quote
Old 06-27-2011, 09:57 PM   #5
Mike Mac
G8 Specialist
Yamaha
 
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
Default Re: removing the crossbar on the swing arm-G9

Yamaha put it in there for a reason. I think it wise to leave it, as its the first thing to save the tranny from taking the initial hit.

What Big Guy said, then it will slide over the mud.
Mike Mac is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
Help with swing arm design Lifted Golf Carts
WTB G9 bushing, swing arm Golf Carts and Parts
Ez-go swing arm lift kit????? Lifted Golf Carts
G9 swing arm drop Design Center


All times are GMT -5. The time now is 08:59 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2023, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.