|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
10-23-2016, 01:36 PM
|
#1 |
|
Not Yet Wild
Join Date: Jan 2011
Location: North Arkansas
Posts: 3
|
2000 EZ-GO Workhorse - tire size? Belt size?
Just got a 2000 EZ-GO Workhorse ST-350 that has been sitting a long time. Put new carb on it, cleaned fuel, etc and runs ok.
Two questions please: Has weather cracked 21x9.00x10 tires on it. Will 22x10x10 fit - appears already lifted? read that a shorter belt will improve low in pull? Can anyone recommend? |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
10-23-2016, 01:47 PM
|
#2 |
|
Gone Wild
 Join Date: Dec 2009
Location: Aiken, SC
Posts: 10,894
|
Re: 2000 EZ-GO Workhorse - tire size? Belt size?
If the front axle is straight across 22s will not fit. As for the belt you can put a shorter belt on there but most workhorses already have a gear ratio setup for more torque so I would just run the standard length HD belt.
|
|
|
|
|
10-23-2016, 06:43 PM
|
#3 |
|
Not Yet Wild
Join Date: Jan 2011
Location: North Arkansas
Posts: 3
|
Re: 2000 EZ-GO Workhorse - tire size? Belt size?
thank you... It has 21 now - believe it is already factory lifted?
|
|
|
|
|
10-23-2016, 08:18 PM
|
#4 |
|
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 10,894
|
Re: 2000 EZ-GO Workhorse - tire size? Belt size?
Straight axle no, curved axle yes.
|
|
|
|
|
10-24-2016, 01:26 PM
|
#5 |
|
Not Yet Wild
Join Date: Jan 2011
Location: North Arkansas
Posts: 3
|
Re: 2000 EZ-GO Workhorse - tire size? Belt size?
Thanks for the info. It is a curved front axle. It currently has 21", I would go back but cannot find 21's. I don't want to go smaller if I can make the 22" work. Appreciate your input.
Trying to input photos Last edited by rmm9243; 10-24-2016 at 01:26 PM.. Reason: add photo |
|
|
|
|
10-24-2016, 03:16 PM
|
#6 |
|
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 10,894
|
Re: 2000 EZ-GO Workhorse - tire size? Belt size?
Lot of the workhorse carts came with a Stryker 21 tire. They are still out there but 22" are easier to find. Depending on what shape the suspension is in it might rub a little when flexed hard.
|
|
|
|
|
10-25-2016, 02:11 PM
|
#7 |
|
Not Yet Wild
Join Date: Sep 2015
Posts: 31
|
Re: 2000 EZ-GO Workhorse - tire size? Belt size?
My workhorse has 22/9/10s with no problem and they look great
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Share your engine size, speed, and tire size (electric guys too) | Members Rides | |||
| Tire size on workhorse vs st UTV | Gas EZGO | |||
| 2002 Workhorse 350cc Belt size | Gas EZGO | |||
| Max tire size for workhorse | Gas EZGO | |||
| Tire and wheel size on workhorse | Gas EZGO | |||
Linear Mode
