Planning Engine Swap

KOZ45 · 11-26-2022, 04:13 PM

Thanks for the tips, I will take the flywheel off and remove the anti seize

KOZ45 · 12-03-2022, 02:29 PM

Been cleaning parts up and putting it back together, as time allows

New fuel pump, fuel lines, spark plugs, and have the starter installed

Used a brass wire wheel and cleaned up the exhaust ports also

I assume the other end of the red heavy gauge starter wire goes to a starter relay? I will have to find one

What's the small fitting on the carb for?

How does everything else look, so far?

What's the P/N for the small round air filter?

I need to buy some SS metal mesh and make my own cover for the flywheel fan cover

KOZ45 · 12-03-2022, 02:32 PM

Pictures

KOZ45 · 12-03-2022, 02:32 PM

KOZ45 · 12-03-2022, 03:03 PM

Duh. I had a flywheel fan cover

KOZ45 · 12-03-2022, 03:21 PM

Would the starter solenoid have been mounted on the engine or why is the starter wire so short?

slonomo · 12-03-2022, 08:20 PM

Quote:

Originally Posted by KOZ45

Would the starter solenoid have been mounted on the engine or why is the starter wire so short?

Yes most of the original solenoids were mounted on the engine. Some models are different though depending on what that engine came out of, like tractors, generators, mowers, equipment.

raydhd · 12-03-2022, 09:03 PM

On my Cub Cadet it is mounted the tractor.

KOZ45 · 12-04-2022, 06:37 PM

I kinda like the solenoid mounted on the starter

Looks like they use a metal band clamp?

KOZ45 · 12-04-2022, 07:13 PM

Briggs and Stratton 846820 SOLENOID STARTER

11-26-2022, 04:13 PM	#151
KOZ45 Gone Wild Join Date: Nov 2021 Location: NW Indiana Posts: 339	Re: Planning Engine Swap Thanks for the tips, I will take the flywheel off and remove the anti seize

12-03-2022, 02:29 PM	#152
KOZ45 Gone Wild Join Date: Nov 2021 Location: NW Indiana Posts: 339	Re: Planning Engine Swap Been cleaning parts up and putting it back together, as time allows New fuel pump, fuel lines, spark plugs, and have the starter installed Used a brass wire wheel and cleaned up the exhaust ports also I assume the other end of the red heavy gauge starter wire goes to a starter relay? I will have to find one What's the small fitting on the carb for? How does everything else look, so far? What's the P/N for the small round air filter? I need to buy some SS metal mesh and make my own cover for the flywheel fan cover

12-03-2022, 03:21 PM	#156
KOZ45 Gone Wild Join Date: Nov 2021 Location: NW Indiana Posts: 339	Re: Planning Engine Swap Would the starter solenoid have been mounted on the engine or why is the starter wire so short?

12-03-2022, 09:03 PM	#158
raydhd VC 460 CLONE GONE WILD Join Date: Oct 2014 Location: Ray BY The Bay NJ Posts: 9,805	Re: Planning Engine Swap On my Cub Cadet it is mounted the tractor.

12-04-2022, 07:13 PM	#160
KOZ45 Gone Wild Join Date: Nov 2021 Location: NW Indiana Posts: 339	Re: Planning Engine Swap Briggs and Stratton 846820 SOLENOID STARTER

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Planning out the dash...	Electric EZGO
Planning on G14	Electric Yamaha
Planning a motor upgrade. NEED HELP	Big Block Talk!
86 club car engine swap. What engine?	Gas Club Car
Who's planning on modding their carts?	Star and Fairplay