lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Members Rides
Members Rides Golf Carts Only.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 10-23-2022, 06:36 PM   #11
TheNewGuy
Admin/Moderator
 
TheNewGuy's Avatar
Yamaha
 
Join Date: Dec 2006
Location: Ohio
Posts: 17,369
Default Re: G2 Paint, lift and Lights

Nice!!

TheNewGuy is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 11-18-2022, 10:29 PM   #12
AEmedic
Not Yet Wild
Yamaha
 
Join Date: Sep 2022
Location: Boise, Idaho
Posts: 21
Default Re: G2 Paint, lift and Lights

Not having good luck with the Jake's lift kit...

I just started installing the kit and all the tie rod ends I received are all left hand thread, there are no right hand thread when there should be two of each. Now I am stuck with the cart half put together and can’t finish!

When I got to the new upper shock bracket install I found thatb the bolt holes on the frame do not line up with the new upper shock brackets so I had to drill new holes so that the brackets would sit flat against the vertical frame supports.

When I got to the lower control arm install. All of the “pre adjusted” Heim joints were loose. None of them were tight so I have no idea what the correct adjustments are. However, I fugure they must still be close and move on.

Now, I'm thinking that this kit seems to have too many issues. I tried to install the spindles but the upper control arms will not go down low enough because they impact the coil-over springs before everything seated correctly. And…the nuts for the bottom of the 1/2” X 6” spindle bolts were not included with the kit.

I'm not sure what the end result will be yet, but I have sent emails with the issues I have encountered...

The shocks were mounted to the center hole in the upper bracket, just like the instructions show.
AEmedic is offline   Reply With Quote
Old 11-23-2022, 05:47 PM   #13
AEmedic
Not Yet Wild
Yamaha
 
Join Date: Sep 2022
Location: Boise, Idaho
Posts: 21
Default Re: G2 Paint, lift and Lights

I sent the lift and related items back.

I am just going to rebuild the front spindles.

Which vendor will have all the parts for my 90 G2?
AEmedic is offline   Reply With Quote
Old 11-24-2022, 11:30 AM   #14
TheNewGuy
Admin/Moderator
 
TheNewGuy's Avatar
Yamaha
 
Join Date: Dec 2006
Location: Ohio
Posts: 17,369
Default Re: G2 Paint, lift and Lights

Quote:
Originally Posted by AEmedic View Post
I sent the lift and related items back.

I am just going to rebuild the front spindles.

Which vendor will have all the parts for my 90 G2?
Check with https://www.plowmanscarts.com/ talk to Don.

TheNewGuy is offline   Reply With Quote
Old 12-02-2022, 06:40 PM   #15
dhollo4
Not Yet Wild
E-Z-GO
 
Join Date: Sep 2022
Location: DFW Area
Posts: 2
Default Re: G2 Paint, lift and Lights

Under body lights look great !
dhollo4 is online now   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Members Rides


Thread Tools
Display Modes


Similar Threads
Thread Forum
Low budget lift and paint job on my G1 Members Rides
Low budget lift and paint job on my G1 Members Rides
91 G2a winter project (paint and lift) Gas Yamaha
Lift kit and $20 paint job done. What next? Design Center
EZGO Golf Cart 36V Fleet SERIES (Custom Paint, Lift, Lights) NORTH GEORGIA Golf Carts and Parts


All times are GMT -5. The time now is 10:13 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.