|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-15-2010, 04:16 PM | #1 |
Getting Wild
Join Date: Dec 2009
Location: Cleveland, GA (Northeast Mtns)
Posts: 141
|
Is this the driven clutch?
Wanna make sure I'm trying take off the right think.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-15-2010, 04:23 PM | #2 |
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: Is this the driven clutch?
yes
|
08-15-2010, 04:30 PM | #3 |
Getting Wild
Join Date: Dec 2009
Location: Cleveland, GA (Northeast Mtns)
Posts: 141
|
Re: Is this the driven clutch?
Well, I've tried two days of keeping it soaked with penetrant and beating on it with a rubber mallet, no luck.
I was gonna order the clutch removal tool, but it doesn't look like the hole on mine has threads. Any ideas? |
08-15-2010, 05:30 PM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Is this the driven clutch?
It is suppose to slide right off but some areas of the country will rust everything solid.... try driving it on with a hammer. Not hard just see if it will move a smidge to break the rust bond? It is not recommended but I use a pickle fork behind them to put a little pressure on em and then use a 2x4 as a drift & 3 pound hammer to try to drive it off placing the 2x4 as close to the hub as possible ....Now the disclaimer... Of course any amount of force is not recommended and many clutches have been broken by force...... Remember everything is casted aluminum and breaks easily........ new is about $300 list. Careful.
|
08-15-2010, 05:38 PM | #5 |
Getting Wild
Join Date: Dec 2009
Location: Cleveland, GA (Northeast Mtns)
Posts: 141
|
Re: Is this the driven clutch?
Yeah I've tried beating it with the rubber mallet from the side and also taking a brass punch and hitting it from the bolt hole.
No luck yet. Want to send it to CPP to have it machined and new spring installed if I ever get it off. What about the bolt hole??? I can't see any threads. |
08-15-2010, 05:40 PM | #6 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Is this the driven clutch?
Nope no threads in that one.
|
08-15-2010, 05:43 PM | #7 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: Is this the driven clutch?
BGW...or... anyone on this forum, ... BGW itself, is/are NOT responsible for your actions in the result of using, or, misusing this information that may cause possible damage to yourself, your property, or someone else!
|
08-15-2010, 05:49 PM | #8 |
Getting Wild
Join Date: Dec 2009
Location: Cleveland, GA (Northeast Mtns)
Posts: 141
|
Re: Is this the driven clutch?
|
08-15-2010, 06:08 PM | #9 |
Not Yet Wild
Join Date: Feb 2007
Location: Tucson,Az
Posts: 66
|
Re: Is this the driven clutch?
The clutch removal tool your probably thinking of and see in a lot of for sale ads is for the PRIMARY Clutch..it has threads..suggestion..try soaking it with penetrating oil for a day or 2 and then use a heat gun (hair dryer type NOT a torch) I have had sucess with this method..key is to spray oil anywhere you can see the shaft in the hole (the one without threads) AND LET IT SOAK...Good luck and remember that $300.00 figure everytime you want to hurry it up
|
08-16-2010, 10:20 AM | #10 |
Gone Wild
Join Date: Jul 2008
Location: Reddick IL
Posts: 11,220
|
Re: Is this the driven clutch?
keeping it soaked with penetrant a
Use good stuff not wd40. |
|
|
Similar Threads | ||||
Thread | Forum | |||
G2 Driven Clutch | Gas Yamaha | |||
driven clutch | Big Block Talk! | |||
driven clutch | Gas EZGO | |||
driven clutch | Gas EZGO | |||
WTB Driven Clutch | Gas Club Car |