Add second micro switch for 50% reverse help

TrevorB · 11-23-2021, 07:46 AM

I’ve got a stock F&R switch that works great with only one micro switch. Does anyone have pictures or install/wiring diagrams for adding a second micro switch to get half-speed reverse? It’s quick with this controller and I’ve adjusted torque/speed curve as much as I can.

Alltrax sr48400 controller

Thanks!!

scottyb · 11-23-2021, 12:24 PM

The challenge is there is no way to trigger a second micro switch (ms) in reverse only with the original F&R. We sell a modified HD replacement with 3 ms for 48v CC. You can use this switch using just 2 of the micro switches

TrevorB · 11-24-2021, 08:24 AM

Yeah I’ve looked into that I was just trying to figure out a way without replacing it. Thanks Scottyb

TrevorB · 02-02-2022, 03:26 PM

Hello again Scotty. I hope this gets back to you as it's been a while.

If/when I upgrade to the HD FNR switch, can it be used with the 2-wire PB6? If so, do you have a wire diagram? I've looked all over and might be able to figure it out, but I hate trial and error with these.

Thank you.

11-23-2021, 12:24 PM	#2
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,410	Re: Add second micro switch for 50% reverse help The challenge is there is no way to trigger a second micro switch (ms) in reverse only with the original F&R. We sell a modified HD replacement with 3 ms for 48v CC. You can use this switch using just 2 of the micro switches

11-24-2021, 08:24 AM	#3
TrevorB Not Yet Wild Join Date: Aug 2021 Location: Florida Posts: 63	Re: Add second micro switch for 50% reverse help Yeah I’ve looked into that I was just trying to figure out a way without replacing it. Thanks Scottyb

02-02-2022, 03:26 PM	#4
TrevorB Not Yet Wild Join Date: Aug 2021 Location: Florida Posts: 63	Re: Add second micro switch for 50% reverse help Hello again Scotty. I hope this gets back to you as it's been a while. If/when I upgrade to the HD FNR switch, can it be used with the 2-wire PB6? If so, do you have a wire diagram? I've looked all over and might be able to figure it out, but I hate trial and error with these. Thank you.

Similar Threads
Thread	Forum
Series F/R switch micro switch wiring?	Electric EZGO
Wiring Alltrax for reverse with single micro-switch F&R switch...	Electric Club Car
1982 club car forward reverse micro switch keeps shorting out	Electric Club Car
Need corresponding colors for micro switch on new FnR switch	Electric Club Car
Replaced micro-switch now full speed reverse & forward	Electric Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum