|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
11-15-2021, 10:52 PM | #1 |
Not Yet Wild
Join Date: Sep 2021
Posts: 9
|
Installing speed magnet on IQ GE motor
Does it press on?
Can you tap it on? Just dont want to break it. Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-24-2021, 04:09 PM | #2 |
Gone Wild
Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,534
|
Re: Installing speed magnet on IQ GE motor
|
11-24-2021, 06:01 PM | #3 |
Gone Wild
Join Date: Apr 2017
Location: SE TN
Posts: 2,217
|
Re: Installing speed magnet on IQ GE motor
I've never replaced one but I always heard that you need to ply them off. A lot of people say use a paint can opener. Done remove any screws.
|
11-24-2021, 06:19 PM | #4 |
Not Yet Wild
Join Date: May 2021
Posts: 19
|
Re: Installing speed magnet on IQ GE motor
Mine was a pain in the ***. My old magnet broke and the metal collar was the hard part to get off. Just take your time and make sure it's square and it goes on pretty easy. I started off soft then hit it just hard enough to move it until it seated
Sent from my SM-G965U using Tapatalk |
11-24-2021, 07:20 PM | #5 |
Gone Wild
Join Date: Sep 2016
Location: Titusville, FL...Space Coast
Posts: 591
|
Re: Installing speed magnet on IQ GE motor
It is pressed on a GE motor and held on by a bolt on an ADC motor....
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Speed magnet GE motor | Electric Club Car | |||
Installing High Speed Magnet GE Motor | Electric Club Car | |||
Speed Code & Hi-Speed Motor Magnet | Electric Club Car | |||
Speed magnet GE motor | Electric Club Car | |||
GE high speed motor magnet ??? | Electric Club Car |