|
Design Center Shop tools, fabrication and Paint and Body |
|
Thread Tools | Display Modes |
10-15-2014, 12:17 PM | #1 |
Gone Wild
Join Date: Jul 2008
Location: mass
Posts: 654
|
simple steering wheel puller
over the past weeks I saw a lot of how do I pull my wheel off.from drilling and tapping and cutting and the worst of all hammering on CC the bushings are held in by plastic, they crack, I don't no about the others I haven't broke those yet this works for me and it was cheap to make 1/4x2x16 long flat stock, enough to go under both sides,nut and bolt from old puller,use a screwdriver to lift wheel while tapping it through,line it up,put nut up to flat stock.tighten down, doesn't need a lot of pressure,light tap, pop
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-15-2014, 12:45 PM | #2 |
Gone Wild
Join Date: Oct 2012
Location: Southwestern Pa.
Posts: 6,214
|
Re: simple steering wheel puller
nice!! Exactly like a gear puller....except not...but almost!!
|
10-15-2014, 01:32 PM | #3 |
Not Yet Wild
Join Date: Sep 2014
Posts: 9
|
Re: simple steering wheel puller
Nice good thinking!!!
|
10-15-2014, 02:11 PM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: simple steering wheel puller
It doesn't get any simpler than that
|
10-15-2014, 07:47 PM | #5 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,147
|
Re: simple steering wheel puller
Old lawn mower blade may work also and already has the hole in the middle
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Wanted - Steering Wheel - Adaptor + Wheel | Golf Carts and Parts | |||
Steering wheel puller? | Gas Club Car | |||
Steering wheel | Gas Yamaha | |||
Which Steering Wheel Should I go for? | Electric Club Car | |||
Alignment of Steering Wheel Only - Wheel Base Straight | Gas Yamaha |