|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-15-2021, 02:33 PM | #1 |
Not Yet Wild
Join Date: Mar 2021
Posts: 5
|
Wire Red Power for Radio thru Accesory
Installed a new Pyle radio and need to run red acc wire through a switch so that it won't drain battery. The old radio was directly wired with red acc wire to the battery. I have existing 3-position switch (off/on/on with lights). How can i wire a circuit for radio through this switch so that radio gets no power if switch is off? I assume I would splice into the "out" for one of these but I'm not sure which wires go to what. Pics show front of accesory switch, rear of switch and red wire which is wired currently directly to battery. Model is 2007 EZGO Sport II gas power.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
Tags |
3-position switch, ezgo, st sport ii |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
GEM 12v accesory battery | Electric golf carts | |||
Wire for Radio. | Gas Yamaha | |||
Radio memory wire options | Electric Club Car | |||
Radio memory wire | Electric Club Car | |||
how to wire radio ,101 | Design Center |