36 volt medalist - let me ask a better question

[bkbannon3]

Let me start by asking a better question. I have a 94 ezgo medalist that came factory with headlights turn signals and the works.. I am stripping out all the old wiring, along with he headlights and factory lights. I will be installing a 36v to 12v converter for lights and accessories. MY ignition has 2 blue and white wires running to it.DSCF0113.jpg The incoming wire is hooked to this fuse box,DSCF0117.jpg which is fed by the green wire hooked to the battery. It then runs to the various lights. There is a red and black wire running to the charge meter from the battery pack, and a green and blue wire run from the charge meterDSCF0115.jpg to the F & R switch and the pedal box as pictured. DSCF0116.jpg I will be installing an analog meter and no longer using the digital. I will run separate wires to feed the meter. My question is this, what should I run to the ignition switch? I would like to do away with the fuse box if possible. I am not sure what to hook up to the ignition.

[bkbannon3]

I finally got it figured out thanks to scottyb. Thank you sir you a gentleman and a scholar. (probably a good judge of fine whisky as well)