Replacing center console/cup holder with larger unit.

[RogerA]

2015 EZGO Freedom RXV 48V. So I'm going to replace the factory center console/cup holder with the larger factory unit that has different cup sizes and a storage slot for my wife's cell phone. It looks like all you do is remove the three speed nuts off the plastic studs on the bottom and give it a good pull up and to the rear, to remove. Correct? Then just slide in the new one and reattach the three speed nuts. Am I missing anything here? Anything else need to be loosened or removed? I have been warned not to disturb or modify any wiring any the dash. This is just a cup holder/console change, I have solved my other 12vdc supply, so no wiring will be involved. THANKS!

[davidgolfer]

Originally Posted by RogerA

2015 EZGO Freedom RXV 48V. So I'm going to replace the factory center console/cup holder with the larger factory unit that has different cup sizes and a storage slot for my wife's cell phone. It looks like all you do is remove the three speed nuts off the plastic studs on the bottom and give it a good pull up and to the rear, to remove. Correct? Then just slide in the new one and reattach the three speed nuts. Am I missing anything here? Anything else need to be loosened or removed? I have been warned not to disturb or modify any wiring any the dash. This is just a cup holder/console change, I have solved my other 12vdc supply, so no wiring will be involved. THANKS!

I’m wanting to do the same thing. Not sure if there is more to it or not. Just wanting the new 2020 cup holder unit instead of the old correct?
Where are you buying?

[bmmonahan]

Please let us know where you can purchase the 2020 cup holder. I would love to do the same to my cart.

[davidgolfer]

Originally Posted by bmmonahan

Please let us know where you can purchase the 2020 cup holder. I would love to do the same to my cart.

https://shop.txtsv.com/694326

[kennywiz]

Here's a pic and found it slightly cheaper.

https://www.countrycat.com/textron-p...6-console-assy

[RogerA]

Originally Posted by bmmonahan

Please let us know where you can purchase the 2020 cup holder. I would love to do the same to my cart.

I found it on e bay for $49.95 plus $12.95 shipping, but the other posts show it much cheaper.

[davidgolfer]

I just ordered off of ezgo site about $36 including shipping

[RogerA]

Originally Posted by davidgolfer

I just ordered off of ezgo site about $36 including shipping

GREAT! Please let us know how the install goes. THANKS!

[idocmiller]

I installed that same unit in my 2017 RXV about a month ago. It was a bit tight and had to cut away some of the plastic shroud inside the dash in order for it to go back in. Then I used a wood clamp to compress the unit into place while I put the bolts back on the 3 posts. It helped to have the front cowl off to see what was happening from the inside but not required. It's a much nicer cup holder than the standard one. Good luck!

[RogerA]

Originally Posted by idocmiller

I installed that same unit in my 2017 RXV about a month ago. It was a bit tight and had to cut away some of the plastic shroud inside the dash in order for it to go back in. Then I used a wood clamp to compress the unit into place while I put the bolts back on the 3 posts. It helped to have the front cowl off to see what was happening from the inside but not required. It's a much nicer cup holder than the standard one. Good luck!

THANKS How difficult is it to remove the front cowl?